<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Load Capacitance:
9pF
Operating Temperature:
-40℃~+85℃
Frequency:
26MHz
Mfr. Part #:
X2B026000B91H-U
Package:
SMD2520-4P
Key Attributes
Model Number:
X2B026000B91H-U
Product Description
Product Overview
The Harmony Electronics HSX221SA is a high-quality Quartz Crystal designed for precise frequency control. It operates at a nominal frequency of 26.000000MHz and is built to stringent specifications for reliability and performance. This crystal is Pb-free, RoHS compliant, HF-Halogen free, and REACH compliant, making it an environmentally conscious choice for various electronic applications.
Product Attributes
- Brand: Harmony Electronics Corp.
- Product Type: Quartz Crystal
- Model: HSX221SA
- Part Number: X2B026000B91H-U
- Sample Order Number: EOS-I10120-1
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
Technical Specifications
| Item | Electrical Spec. | Unit | Notes | Min | Type | Max |
|---|---|---|---|---|---|---|
| Frequency (FL) | MHz | 26.000000 | ||||
| Mode of oscillation | Fundamental | |||||
| Frequency tolerance | ppm | at 253 | -10 | +10 | ||
| Equivalent resistance (RR) | SERIES | 100 | ||||
| Storage temperature range | -40 | +85 | ||||
| Operable temperature range | -40 | +85 | ||||
| Temperature stability | ppm | -40 ~ +85 | -20 | +20 | ||
| Loading capacitance (CL) | pF | 9.0 | ||||
| Drive level (DL) | W | 10 | 100 | |||
| Shunt Capacitance (C0) | pF | 2.0 | ||||
| Insulation resistance | M | at DC 100V | 500 | |||
| Aging | ppm/Year | -3 | +3 | |||
| Circuit Measured in | HP/E5100A,S&A 250B | |||||
| Dimensions (L x W) | mm | 2.5 x 2.0 | ||||
| Carrier Tape Width | mm | 8.0 | ||||
| Reel Quantity | PCS/REEL | Standard Packing | 3,000 | |||
| Shock Test | Dropping from 120 cm height 3 times on 30 mm Concrete floor. | Refer to: JIS C 60068232 | A | |||
| Vibration Test | Frequency 1055Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 2 hours to each direction. | Refer to: JIS C 6006826 | A | |||
| Leakage Test | Leak Rate | Pam/sec. Max. | Measured by Helium leak detector. | 1.0x10 | ||
| Solder ability | Dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec. | Refer to: JIS C 60068220 | B | |||
| Bending Strength | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. | Refer to: EIAJ ET7403 | A | |||
| Adhesion | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. | Refer to: EIAJ ET7403 | C | |||
| Body strength | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec | Refer to: EIAJ ET7403 | C | |||
| Resistance of Soldering Heat | Performing as the following reflow: | A | ||||
| Humidity Test | Temperature 602, RH 90~95%, duration of 240 hours. | Refer to: JIS C 6006823 | A | |||
| Storage in Low Temperature | 40deg.C 2deg.C, duration of 240 hours. | Refer to: JIS C 6006821 | A | |||
| Storage in High Temperature | +85deg.C 2deg.C, duration of 240 hours. | Refer to: JIS C 6006822 | A | |||
| Temperature cycles | 40deg.C 2deg.C (30min) +85deg.C 2deg.C (30min) 25 cycles. | Refer to: JIS C 0025 | A |
2410121447_HELE-X2B026000B91H-U_C254315.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
