<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±15ppm
Load Capacitance:
9pF
Operating Temperature:
-20℃~+70℃
Frequency:
26MHz
Mfr. Part #:
X2C026000B91H-V
Package:
SMD2016-4P
Key Attributes
Model Number:
X2C026000B91H-V
Product Description
Product Overview
The HSX211S is a high-quality Quartz Crystal Unit manufactured by HARMONY ELECTRONICS CORP. Designed for various product applications, this crystal offers a stable frequency of 26.000MHz with a frequency tolerance of +/-10 ppm at 25C. It features a robust construction with a holder type of HSX211S and a seam seal, ensuring reliability in operation. The crystal is suitable for a wide operable temperature range of -20C to +70C and is available in tape and reel packaging for automated assembly processes.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX211S
- Origin: TAIWAN
- Manufacturing Locations: TAIWAN, THAILAND, CHINA
- Moisture Sensitivity Level: Level 1
- Compliance: ROHS Compliant, Green Product
Technical Specifications
| Specification | Details |
|---|---|
| Frequency | 26.000000MHz |
| Holder Type | HSX211S |
| Frequency Tolerance | +/-10 ppm at 25C +/-3C |
| Equivalent Resistance | 100 ohms Max. / SERIES |
| Storage Temperature Range | -40C To +85C |
| Operable Temperature Range | -20C To +70C |
| Temperature Drift | +/-15 ppm (-20C To +70C) |
| Loading Capacitance (CL) | 9.0 pF |
| Drive Level | 10W (100uW Max) |
| Shunt Capacitance | 2.0 pF |
| Insulation Resistance | More than 500M ohms at DC 100V |
| Mode of Oscillation | Fundamental |
| Shocking Test Variation | Frequency less than +/-5 ppm, Resistance less than +/-15% or 2ohms max. (after dropping from 120 cm height 3 times on Concrete floor) |
| Aging | Less than +/-3 ppm/Year |
| Holder Type | HSX211S Seam type |
| Dimensions | Refer to page 4 |
| Emboss Carrier Tape & Reel | Refer to page 6 and 7 |
| Standard Packing Quantity | 3,000 PCS / REEL |
| Carrier Tape Material | PS |
| Top Tape Material | Polyester |
| Cover Tape Release Strength | 0.1N to 0.7N (Pulling direction 165 to 180, Speed 300mm/min) |
| Mechanical Endurance - Natural Drop | Dropping from 120 cm height 3 times on Concrete floor (Specification Code A) |
| Mechanical Endurance - Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. (Specification Code A) |
| Mechanical Endurance - Sealing Tightness | Leak Rate 1.0x10-8 Pa-m3/sec. Max. (Measured by Helium leak detector) |
| Mechanical Endurance - Solderability | After applying ROSIN Flux, dipping in solder bath at 245C+/-5C for 3+/-0.5 sec. (Specification Code B) |
| Mechanical Endurance - Substrate Bending | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec (Pressure speed :0.5 mm / sec) (Specification Code A) |
| Mechanical Endurance - Adhesion | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure :5N for 101 sec (Specification Code A) |
| Mechanical Endurance - Body strength | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec (Specification Code A) |
| Environmental Endurance - Humidity | Temperature 60C +/-2C, RH 90~95%, Duration of 240 hours. (Specification Code A) |
| Environmental Endurance - Storage in Low Temperature | -40C +/-2C, Duration of 240 hours. (Specification Code A) |
| Environmental Endurance - Storage in High Temperature | +85C +/-2C, Duration of 240 hours. (Specification Code A) |
| Environmental Endurance - Temperature cycles | -40C +/-2C (30min) +85C +/-2C (30min) 25 cycles. (Specification Code A) |
| Specification Code A | Frequency variation shall be within +/-5ppm and equivalent resistance shall be within +/-15% or 2 |
| Specification Code B | More than 90% of lead shall be covered by new solder. |
Note: All specifications are based on the document dated 2014/03/26.
2410121333_HELE-X2C026000B91H-V_C136064.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
