<
>
Specifications
Frequency Stability:
±50ppm
Voltage - Supply:
3V~3.6V
Operating Temperature:
-40℃~+85℃
Frequency:
16.384MHz
Mfr. Part #:
SSR016384I3CH
Package:
SMD7050-4P
Key Attributes
Model Number:
SSR016384I3CH
Product Description
Product Overview
The HSO751S is a crystal oscillator from Harmony Electronics Corporation, designed for reliable electronic applications. It operates at a nominal frequency of 16.384000MHz and offers a fundamental mode of oscillation. This product is Pb-free, RoHS Compliant, HF-Halogen free, and REACH Compliant, indicating a commitment to environmental standards. Its robust design and specified performance characteristics make it suitable for various electronic circuits requiring stable frequency generation.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Crystal Oscillator
- Model: HSO751S
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
Technical Specifications
| Specification | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Output Frequency | FL | 16.384000 | MHz | |
| Mode of Oscillation | Fundamental | |||
| Frequency Stability | Δf/F | -50 to +50 | ppm | @3.3±0.3V/-10~70℃ |
| Operating Temperature Range | Topr | -10 to +70 | ℃ | 25℃ |
| Supply Voltage | Vdd | 3.0 to 3.6 | V | |
| Output Load | CL | 30 | pF | C-MOS |
| Current Consumption 1 (#1 pin: open or "H") | Idd1 | - to 25 | mA | @3.3V/ 25±3℃ |
| Current Consumption 2 (#1 pin: "L" level) | Idd2 | - to 0.02 | mA | |
| Low Level Output Voltage | Vol | - to 0.1xVdd | V | |
| High Level Output Voltage | Voh | 0.9xVdd to - | V | |
| Symmetry Duty | 40 to 60 | % | ||
| Rise & Fall Time | Tr & Tf | - to 10 | ns | |
| Low Level Input Current | Iil | - to -100 | uA | |
| High Level Input Current | Iih | - to 100 | uA | |
| Low Level Input Voltage | Vil | - to Vddx0.3 | V | |
| High Level Input Voltage | Vih | Vddx0.7 to - | V | |
| Output Disable Time | Tplz | - to 100 | nsec | |
| Output Enable Time | Tpzl | - to 100 | nsec | |
| Aging | -5 to 5 | ppm/year | ||
| Start-up Time | - to 10 | ms | ||
| Jitter, Phase RMS(1-) | - to 1 | ps | 12KHz~20MHz Frequency Band | |
| Absolute Maximum Ratings: Vdd Terminal Voltage | Vdd | -0.5 to 7.0 | V | |
| Absolute Maximum Ratings: Input Terminal Voltage | Vcont | -0.5 to Vdd+0.5 | V | |
| Absolute Maximum Ratings: Output Terminal Voltage | Vout | -0.5 to Vdd+0.5 | V | |
| Absolute Maximum Ratings: Output Terminal Current | Iout | - to 15 | mA | |
| Absolute Maximum Ratings: Storage Temperature Range | Tstr | -55 to 125 | deg.C | |
| Dimensions (L x W) | 7.0 x 5.0 | mm | ±0.2 | |
| Pin Connections | 1: OE (Output Enable), 2: Vdd, 3: GND, 4: Output | |||
| Carrier Tape Material | PS Conductive | |||
| Top Tape Material | Polyester | |||
| Standard Packing Quantity | 1,000 | PCS / REEL | ||
| Mechanical Performance: Shock | Dropping from 50 cm height 3 times on 30mm Concrete Floor | Refer to: JIS C 60068-2-32 | ||
| Mechanical Performance: Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | Refer to: JIS C 60068-2-6/MIL-HDBK-781A 6.5.2 | ||
| Mechanical Performance: Leakage Test | Leak Rate 1.0x10-9 Pa-m3/sec. Max. | Measured by Helium leak detector. Refer to: JIS C 60068-2-17 | ||
| Mechanical Performance: Solder ability | After applying ROSIN Flux, dipping in solder bath at 245℃ +/- 5℃ for 3+/-0.5 sec. | Refer to: JIS C 60068-2-20/C 60068-2-58 | ||
| Environmental Performance: Resistance of Soldering Heat | Performing as the following reflow | Refer to: JIS C 60068-2-58 | ||
| Environmental Performance: Humidity | 60℃+/-2℃, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-3 | ||
| Environmental Performance: Storage in Low Temperature | -40℃ +/-2℃, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-1 | ||
| Environmental Performance: Storage in High Temperature | +85℃ +/-2℃, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-2 | ||
| Environmental Performance: Thermal Shock | -40℃ +/-2℃ (30min) ↔ +85℃ +/-2℃ (30min) 25 cycles. And Temperature Increasing/reducing time≤3mins. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 0025 |
2410121502_HELE-SSR016384I3CH_C254226.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
