Online Service

Online Service

Contact Person
+86 13528435210
Quality Pb Free RoHS Compliant HELE SSR080000F5CH 80 MHz Crystal Oscillator Frequency Stability Component factory
<
Quality Pb Free RoHS Compliant HELE SSR080000F5CH 80 MHz Crystal Oscillator Frequency Stability Component factory
>
Specifications
Frequency Stability:
±30ppm
Voltage - Supply:
4.5V~5.5V
Operating Temperature:
-10℃~+70℃
Frequency:
80MHz
Mfr. Part #:
SSR080000F5CH
Package:
SMD7050-4P
Key Attributes
Model Number: SSR080000F5CH
Product Description

Product Overview

The HSO751S Crystal Oscillator from Harmony Electronics Corporation is a high-performance frequency control component designed for various electronic applications. This Pb-free, RoHS Compliant, HF-Halogen free, and REACH Compliant product offers a nominal frequency of 80.000000MHz and is manufactured in Taiwan. It is suitable for applications requiring precise frequency stability and reliable operation within a specified temperature range.

Product Attributes

  • Brand: HARMONY ELECTRONICS CORPORATION
  • Model: HSO751S
  • Part Number: SSR080000F5CH
  • Sample Order Number: EOSJ503051
  • Country of Origin: Taiwan
  • Certifications: Pb free, RoHS Compliant, HFHalogen free, REACH Compliant
  • MSL Level: 1

Technical Specifications

Item Symbol Electrical Spec. Unit Condition
Electrical Specifications FL 80.000000 MHz Output Frequency
3RD Overtone Mode of Oscillation
f/F -30 ~ +30 PPM Frequency Stability @5.00.5V/10~70
Topr -10 ~ +70 Operating temp. range
Vdd 4.5 ~ 5.5 V Supply voltage
CL 15 pF Output load (CMOS)
Idd1 - ~ 60 mA Current consumption 1 (#1 pin: open or "H") @5.0V/ 253
Idd2 - ~ 40 mA Current consumption 2 (#1 pin: "L" level)
Vol - ~ 0.1xVdd V Low level output voltage
Voh 0.9xVdd ~ - V High level output voltage
Duty 40 ~ 60 % Symmetry
Tr & Tf - ~ 5 ns Rise & Fall time
Iil - ~ -150 uA Low level input current
Iih - ~ 100 uA High Level input current
Vil - ~ Vddx0.3 V Low level input voltage
Vih Vddx0.7 ~ - V High level input voltage
Tplz - ~ 100 nsec Output disable time
Tpzl - ~ 100 nsec Output enable time
Aging -5 ~ 5 ppm/year
Startup time - ~ 10 ms
Jitter, Phase RMS(1) - ~ 1 ps 12KHz~20MHz Frequency Band
Absolute Maximum Ratings Vdd -0.5 ~ 7.0 V Vdd terminal voltage
Vcont -0.5 ~ Vdd+0.5 V Input terminal voltage
Vout -0.5 ~ Vdd+0.5 V Output terminal voltage
Iout 15 mA Output terminal current
Tstr -55 ~ 125 deg.C Storage temp. range
Dimensions Length 7.0 0.2 mm
Width 5.0 0.2 mm
Height Max. 3.7 mm
Land Pattern Layout See diagram
Pin Connections
  • #1: OE (Output Enable)
  • #2: Vdd
  • #3: Output
  • #4: GND
Mechanical Performance Shock Dropping from 50 cm height 3 times on 30mm Concrete Floor. A Refer to: JIS C 60068232
Vibration Frequency 1055Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. A Refer to: JIS C 6006826/MILHDBK781A 6.5.2
Leakage Test Leak Rate 1.0x109 Pam3/sec. Max. Measured by Helium leak detector. - Refer to: JIS C 60068217
Solder ability After applying ROSIN Flux, dipping in solder bath at 245deg.C +/ 5deg.C for 3+/0.5 sec. B Refer to: JIS C 60068220/C 60068258
Environmental Performance Resistance of Soldering Heat Performing as the following reflow. A Refer to: JIS C 60068258
Humidity Temperature 60+/2, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. A Refer to: JIS C 6006823
Storage in Low Temperature 40deg.C +/2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. A Refer to: JIS C 6006821
Storage in High Temperature +85deg.C +/2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. A Refer to: JIS C 6006822
Thermal shock 40deg.C +/2deg.C (30min) +85deg.C +/2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. A Refer to: JIS C 0025

Note: Storage Temperature is only for the product itself.

Specifications code: A = Frequency variation shall be within +/-5ppm, B = More than 90% of lead shall be covered by new solder.


2411121056_HELE-SSR080000F5CH_C254237.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max