<
>
Specifications
Frequency Stability:
±30ppm
Voltage - Supply:
3V~3.6V
Operating Temperature:
-40℃~+85℃
Frequency:
48MHz
Mfr. Part #:
SSW048000F3CH
Package:
SMD3225-4P
Key Attributes
Model Number:
SSW048000F3CH
Product Description
Product Overview
The HSO321S Crystal Oscillator from Harmony Electronics Corporation is a high-performance frequency control component designed for various electronic applications. It offers a nominal frequency of 48.000000MHz with a frequency stability of 30 ppm. This RoHS compliant and Pb-free product is suitable for use in a wide operating temperature range of -10 to +70 and operates with a supply voltage of 3.0-3.6V. The HSO321S is designed for surface-mount technology (SMT) processes and comes in an embossed carrier tape and reel for automated assembly.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Crystal Oscillator
- Model: HSO321S
- Sample P/N: EOS-H10242-1
- Harmony P/N: SSW048000F3CH
- Release Date: 2017/01/20
- Version: 00
- MSL Level: 01
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- Country of Origin: Taiwan
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition | Min | Type | Max |
|---|---|---|---|---|---|---|---|
| Electrical Specifications | |||||||
| Output Frequency | FL | 48.000000 | MHz | @3.30.3V/-10~70 | |||
| Frequency Stability | f/F | ppm | -30 | +30 | |||
| Operating temperature range | Topr | -10 | 25 | +70 | |||
| Supply voltage | Vdd | V | 3.0 | 3.3 | 3.6 | ||
| Pin #1 options | YES | ||||||
| Output load | CL | 15 | pF | C-MOS | |||
| Current consumption 1 | Idd1 | mA | (#1 pin: open or "H") @3.3V/ 253 (Idd1, Idd2 test at No Load) | 10 | |||
| Current consumption 2 | Idd2 | mA | (#1 pin: "L" level) | 0.01 | |||
| Low level output voltage | Vol | V | 0.1xVdd | ||||
| High level output voltage | Voh | V | 0.9xVdd | ||||
| Symmetry Duty | % | 40 | 50 | 60 | |||
| Rise & Fall time | Tr & Tf | ns | 7 | ||||
| Low level input current | Iil | uA | 10 | ||||
| High Level input current | Iih | uA | 10 | ||||
| Low level input voltage | Vil | V | Vddx0.3 | ||||
| High level input voltage | Vih | V | Vddx0.7 | ||||
| Output disable time | Tplz | nsec | 150 | ||||
| Output enable time | Tpzl | msec | 10 | ||||
| Aging | ppm/year | -3 | 3 | ||||
| Start-up time | ms | 10 | |||||
| Jitter, Phase RMS(1-) | ps | 12KHz~20MHz Frequency Band | 1 | ||||
| Absolute Maximum Ratings | |||||||
| Vdd terminal voltage | Vdd | V | -0.5 | 4.0 | |||
| Input terminal voltage | Vcont | V | -0.5 | Vdd+0.5 | |||
| Output terminal voltage | Vout | V | -0.5 | Vdd+0.5 | |||
| Output terminal current | Iout | mA | 15 | ||||
| Storage temp. range | Tstr | deg.C | -55 | 125 | |||
| Dimensions (Unit: mm) | |||||||
| 1.0 Max. | |||||||
| 3.20.2 | |||||||
| 2.50.2 | |||||||
| 1.2 | |||||||
| 0.95 | |||||||
| 1.2 | |||||||
| 2.2 | |||||||
| 1.75 | |||||||
| 0.9 | |||||||
| 1.0 | |||||||
| 0.65 | |||||||
| Pin Connections | |||||||
| Pin #1 | Vdd | ||||||
| Pin #2 | Output | ||||||
| Pin #3 | GND | ||||||
| Pin #4 | OE(Output Enable) | ||||||
| Mechanical Performance | |||||||
| Shock | Dropping from 50 cm height 3 times on 30mm hard wooden board. | Refer to: JIS C 60068-2-6 A | |||||
| Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | Refer to: MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A | |||||
| Leakage Test | Leak Rate | 1.0x10-9 Pa-m3/sec. Max. | Measured by Helium leak detector. | ||||
| Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec. | Refer to: JIS C 60068-2-20 B | |||||
| Environmental Performance | |||||||
| Resistance of Soldering Heat | Performing as the following reflow: | ||||||
| Humidity | Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-3 A | |||||
| Storage in Low Temperature | -40deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-1 A | |||||
| Storage in High Temperature | +85deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 60068-2-2 A | |||||
| Temperature cycles | -30deg.C +/-2deg.C (30min) +85deg.C +/-2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 0025 A | |||||
2410121628_HELE-SSW048000F3CH_C253920.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
