<
>
Specifications
Frequency Stability:
±50ppm
Voltage - Supply:
4.5V~5.5V
Operating Temperature:
-10℃~+70℃
Frequency:
24MHz
Mfr. Part #:
SSR024000I5CH
Package:
SMD7050-4P
Key Attributes
Model Number:
SSR024000I5CH
Product Description
Harmony Electronics HSO751S Crystal Oscillator
Product Overview
The Harmony Electronics HSO751S is a high-performance crystal oscillator designed for applications requiring precise frequency control. It offers a nominal frequency of 24.000000MHz with excellent frequency stability and low current consumption. This RoHS compliant and Pb-free component is suitable for various industrial and electronic applications.
Product Attributes
- Brand: Harmony Electronics Corp.
- Product Type: Crystal Oscillator
- Model: HSO751S
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Electrical Specifications | FL | 24.000000 | MHz | |
| f/F | -50 to +50 | ppm | @5.00.5V / -10~70 | |
| Topr | -10 to +70 | |||
| Vdd | 4.5 to 5.5 | V | ||
| CL | 15 | pF | C-MOS | |
| Idd1 | - | 16 | mA | @5.0V / 253 (Pin #1: open or "H") |
| Idd2 | - | 0.02 | mA | (Pin #1: "L" level) |
| Vol | - | 0.1xVdd | V | |
| Voh | 0.9xVdd | - | V | |
| Duty | 40 to 60 | % | ||
| Tr & Tf | - | 10 | ns | |
| Aging | -5 to +5 | ppm/year | ||
| Start-up time | - | 10 | ms | |
| Jitter, Phase RMS(1-) | - | 1 | ps | 12KHz~20MHz Frequency Band |
| Absolute Maximum Ratings | Vdd | -0.5 ~ 7.0 | V | |
| Vcont | -0.5 ~ Vdd+0.5 | V | ||
| Vout | -0.5 ~ Vdd+0.5 | V | ||
| Iout | - | 15 | mA | |
| Tstr | -55 ~ 125 | deg.C | ||
| Dimensions | Length | 7.0 0.2 | mm | |
| Width | 5.0 0.2 | mm | ||
| Height | Max. 3.7 | mm | ||
| Pin Connections | #1 | OE (Output Enable) | ||
| #2 | Vdd | |||
| #3 | GND | |||
| #4 | Output | |||
| Mechanical Performance | Shock | Dropping from 50 cm height 3 times on 30mm hard wooden board. | Refer to: JIS C 60068-2-32 A | |
| Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | Refer to: JIS C 60068-2-6 A | ||
| Leakage Test | Leak Rate 1.0x10 Pa-m/sec. Max. | Measured by Helium leak detector. | ||
| Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec. | Refer to: JIS C 60068-2-20 B | ||
| Environmental Performance | Resistance of Soldering Heat | Performing as the following reflow: A | ||
| Humidity | Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to room temperature, then check after 1~2 hours. | Refer to: JIS C 60068-2-3 A | ||
| Storage in Low Temperature | -55deg.C +/-2deg.C, Duration of 240 hours. Back to room temperature, then check after 1~2 hours. | Refer to: JIS C 60068-2-1 A | ||
| Storage in High Temperature | +125deg.C +/-2deg.C, Duration of 240 hours. Back to room temperature, then check after 1~2 hours. | Refer to: JIS C 60068-2-2 A | ||
| Temperature cycles | -55deg.C+/-2deg.C (30min) +125deg.C+/-2deg.C (30min), 25 cycles. Temp. Inc/red time 3mins. Back to room temp., check after 1~2 hours. | Refer to: JIS C 0025 A |
2410121502_HELE-SSR024000I5CH_C254228.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
