<
>
Specifications
Frequency Stability:
±30ppm
Voltage - Supply:
3.3V
Operating Temperature:
-20℃~+70℃
Frequency:
22.1184MHz
Mfr. Part #:
S2H022118F3CHC-T
Package:
SMD2520-4P
Key Attributes
Model Number:
S2H022118F3CHC-T
Product Description
Product Overview
The HSO221S Crystal Oscillator by Harmony Electronics Corporation is a high-performance frequency control component designed for various electronic applications. It offers a nominal frequency of 22.118400MHz with excellent frequency stability and low current consumption. This RoHS and REACH compliant product is manufactured in Taiwan and is suitable for automated SMT processes, providing reliable operation within specified environmental and mechanical conditions. It is ideal for applications requiring precise frequency generation and stability.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Crystal Oscillator
- Model: HSO221S
- Green Product: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- Country of Origin: Taiwan
- Manufacturing Locations: Kaohsiung (Taiwan), Taipei (Taiwan), Thailand, Shenzhen (China), Suzhou (China)
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Output Frequency | FL | 22.118400 | MHz | |
| Frequency Stability | f/F | -30 | ppm | @3.30.3V/-20~70 |
| +30 | ppm | @3.30.3V/-20~70 | ||
| Operating Temperature Range | Topr | -20 | ||
| 25 | ||||
| +70 | ||||
| Supply Voltage | Vdd | 3.0 | V | |
| 3.3 | V | |||
| 3.6 | V | |||
| Output Load | CL | 15 | pF | C-MOS |
| Current Consumption 1 | Idd1 | - | 7 | mA @3.3V/ 253 (#1 pin: open or "H") |
| Current Consumption 2 | Idd2 | - | 0.01 | mA (@3.3V/ 253 #1 pin: "L" level) |
| Low Level Output Voltage | Vol | - | 0.1xVdd | V |
| High Level Output Voltage | Voh | 0.9xVdd | - | V |
| Symmetry Duty | 40 | % | ||
| 50 | % | |||
| 60 | % | |||
| Rise & Fall Time | Tr & Tf | - | 10 | ns |
| Low Level Input Current | Iil | - | 10 | uA |
| High Level Input Current | Iih | - | 10 | uA |
| Low Level Input Voltage | Vil | - | Vddx0.3 | V |
| High Level Input Voltage | Vih | Vddx0.7 | - | V |
| Output Disable Time | Tplz | - | 150 | nsec |
| Output Enable Time | Tpzl | - | 10 | msec |
| Aging | -3 | ppm/year | ||
| 3 | ppm/year | |||
| Start-up Time | - | 10 | ms | |
| Jitter, Phase RMS(1-) | - | 1 | ps (12KHz~20MHz Frequency Band) | |
| Absolute Maximum Ratings | ||||
| Vdd terminal voltage | Vdd | -0.5 ~ 4.0 | V | |
| Input terminal voltage | Vcont | -0.5 ~ Vdd+0.5 | V | |
| Output terminal voltage | Vout | -0.5 ~ Vdd+0.5 | V | |
| Output terminal current | Iout | 15 | mA | |
| Storage temp. range | Tstr | -55 ~ 125 | deg.C |
| Pin # | Function |
|---|---|
| #2 | Vdd |
| #3 | Output |
| #4 | GND |
| #1 | OE(Output Enable) |
| Item | Dimensions (mm) | Tolerance |
|---|---|---|
| Length | 2.5 | 0.1 |
| Width | 2.0 | 0.1 |
| Height | 1.15 | Max. |
| Item | Test Method | Specifications |
|---|---|---|
| Shock | Dropping from 50 cm height 3 times on 30mm Hard Wooden Board. Refer to: JIS C 60068-2-6 A | |
| Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. Refer to: MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A | |
| Leakage Test | Measured by Helium leak detector. Refer to: JIS C 60068-2-20 B | Leak Rate 1.0x10-9 Pa-m3/sec. Max. |
| Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec. Refer to: JIS C 60068-2-20 B | More than 90% of lead shall be covered by new solder. |
| Resistance of Soldering Heat | Performing as the following reflow: A | |
| Humidity | Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to room temperature first, then in 1~2 hours, the component shall be checked. Refer to: JIS C 60068-2-3 A | Frequency variation shall be within +/-5ppm and equivalent resistance shall be within +/-15% or 2 |
| Storage in Low Temperature | -40deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked. Refer to: JIS C 60068-2-1 A | Frequency variation shall be within +/-5ppm and equivalent resistance shall be within +/-15% or 2 |
| Storage in High Temperature | +85deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then in 1~2 hours, the component shall be checked. Refer to: JIS C 60068-2-2 A | Frequency variation shall be within +/-5ppm and equivalent resistance shall be within +/-15% or 2 |
| Temperature cycles | -30deg.C +/-2deg.C (30min) +85deg.C +/-2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then in 1~2 hours, the component shall be checked. Refer to: JIS C 0025 A | Frequency variation shall be within +/-5ppm and equivalent resistance shall be within +/-15% or 2 |
2409291004_HELE-S2H022118F3CHC-T_C253907.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
