<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
10pF
Frequency:
30MHz
Mfr. Part #:
X2B030000BA1H-HW
Package:
SMD2520-4P
Key Attributes
Model Number:
X2B030000BA1H-HW
Product Description
Product Overview
The HSX221SA is a quartz crystal unit manufactured by HARMONY ELECTRONICS CORP. Designed for general-purpose applications, this crystal operates at a nominal frequency of 30.000MHz. It features a holder type of HSX221SA and is suitable for use in various electronic products.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX221SA
- Country of Origin: TAIWAN
- Application For: Products: CRYSTAL
- Holder Type: HSX221SA
- Marking: Laser marking (Logo, Nominal Frequency, Manufactured year & month, Manufacturing Lot No.)
- Base Material: Alumina Ceramic (Al2O3)
- Lid Material: Fe-Ni-Co
- Cover Ring Material: Fe-Ni-Co Alloy
- Adhesive: Silver Conductive Silicon Resin
Technical Specifications
| Specification | Value | Notes |
|---|---|---|
| Frequency | 30.000000MHz | |
| Frequency Tolerance | +/-10 ppm | at 25C +/-3C |
| Equivalent Resistance | 70 ohms Max. | /SERIES |
| Storage Temperature Range | -40C To +85C | |
| Operable Temperature Range | -20C To +70C | |
| Temperature Drift | +/-20ppm | -20C To +70C |
| Loading Capacitance (CL) | 10.0 pF | |
| Drive Level | 10 W | (100W Max) |
| Shunt Capacitance | 2.0 pF Max | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Circuit Measurement | Measured in HP/E5100A, S&A 250B | |
| Shocking (Frequency Variation) | Less than +/-5 ppm | Dropping from 50 cm height 3 times on firm wood |
| Shocking (Resistance Variation) | Less than +/- 15 % or 2ohms max. | Dropping from 50 cm height 3 times on firm wood |
| Aging | Less than +/- 1 ppm/Year | |
| Holder Type | HSX221SA | Seam type |
| Carrier Tape Dimensions | Refer to page 6 | |
| Reel Dimensions | Refer to page 7 | |
| Storage Condition | Temperature: +40C Max., Relative Humidity: 80% Max. | |
| Standard Packing Quantity | 3,000 PCS / REEL | |
| Tape Material | Carrier tape: PS, Top tape: Polyester | |
| Cover Tape Release Strength | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Endurance (Natural Drop) | Frequency variation within +/-5ppm, equivalent resistance within specification | Drop 3 times from 50cm onto hard wooden board |
| Mechanical Endurance (Vibration) | Frequency variation within +/-5ppm, equivalent resistance within specification | 10-55Hz, 0.8mm amplitude, 2 hours per axis (X, Y, Z) |
| Mechanical Endurance (Sealing Tightness) | Leak Rate 1.0x10 Pa-m/sec. Max. | Measured by Helium leak detector (Fine Leakage) |
| Mechanical Endurance (Solderability) | More than 90% of lead covered by new solder | Dipping in solder bath at 245C+/-5C for 3+/-0.5 sec after applying ROSIN Flux |
| Environmental Performance (Humidity) | Frequency variation within +/-5ppm, equivalent resistance within specification | 60C +/-2C, 90~95% RH, 240 hours |
| Environmental Performance (Storage in Low Temperature) | Frequency variation within +/-5ppm, equivalent resistance within specification | -40C +/-2C, 240 hours |
| Environmental Performance (Storage in High Temperature) | Frequency variation within +/-5ppm, equivalent resistance within specification | +85C +/-2C, 240 hours |
| Environmental Performance (Temperature Cycles) | Frequency variation within +/-5ppm, equivalent resistance within specification | -40C to +85C, 25 cycles |
2410121327_HELE-X2B030000BA1H-HW_C254252.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
