<
>
Specifications
Frequency Stability:
±50ppm
Voltage - Supply:
3V~3.6V
Operating Temperature:
-40℃~+85℃
Frequency:
48MHz
Mfr. Part #:
SSW048000I3CHE-T
Package:
SMD3225-4P
Key Attributes
Model Number:
SSW048000I3CHE-T
Product Description
Product Overview
The HSO321S Crystal Oscillator from Harmony Electronics Corporation is a high-performance frequency control component designed for various electronic applications. It offers precise frequency output at 48.000000MHz with excellent frequency stability. The device is built to withstand a wide operating temperature range and features low current consumption, making it suitable for power-sensitive designs. It is Pb-free, RoHS compliant, HF-Halogen free, and REACH compliant, aligning with environmental and regulatory standards.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Crystal Oscillator
- Model: HSO321S
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Electrical Specifications | FL | 48.000000 | MHz | |
| f/F | -50 to +50 | ppm | @3.30.3V / -40~85 | |
| Topr | -40 to +85 | |||
| Vdd | 3.0 to 3.6 | V | ||
| CL | 15 | pF | C-MOS (Idd1, Idd2 test at No Load) | |
| Idd1 | - to 13 | mA | @3.3V / 253 (#1 pin: open or "H") | |
| Idd2 | - to 0.01 | mA | (#1 pin: "L" level) | |
| Vol | - to 0.1xVdd | V | ||
| Voh | 0.9xVdd to - | V | ||
| Duty | 40 to 60 | % | ||
| Tr & Tf | - to 10 | ns | ||
| Iil | - to 10 | uA | ||
| Iih | - to 10 | uA | ||
| Input Voltage | Vil | - to Vddx0.3 | V | |
| Vih | Vddx0.7 to - | V | ||
| Tplz | - to 150 | nsec | Output disable time | |
| Tpzl | - to 10 | msec | Output enable time | |
| Aging | -3 to 3 | ppm/year | ||
| Start-up time | - to 10 | ms | ||
| Jitter, Phase RMS(1-) | - to 1 | ps | 12KHz~20MHz Frequency Band | |
| Absolute Maximum Ratings | Vdd | -0.5 ~ 4.0 | V | Vdd terminal voltage |
| Vcont | -0.5 ~ Vdd+0.5 | V | Input terminal voltage | |
| Vout | -0.5 ~ Vdd+0.5 | V | Output terminal voltage | |
| Iout | 15 | mA | Output terminal current | |
| Tstr | -55 ~ 125 | deg.C | Storage temp. range | |
| Mechanical Performance | Shock | Dropping from 50 cm height 3 times on 30mm hard wooden board. | Refer to: JIS C 60068232 | |
| Vibration | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. | Refer to: JIS C 6006826 | ||
| Leakage Test | Leak Rate 1.0x10 Pam/sec. Max. Measured by Helium leak detector. | |||
| Solder ability | After applying ROSIN Flux, dipping in solder bath at 245deg.C +/- 5deg.C for 3+/-0.5 sec. | Refer to: JIS C 60068220 | ||
| Environmental Performance | Resistance of Soldering Heat | Performing as the following reflow: | A | |
| Humidity | Temperature 60+/-2, RH 90~95%, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 6006823 | ||
| Storage in Low Temperature | -55deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 6006821 | ||
| Storage in High Temperature | +125deg.C +/-2deg.C, Duration of 240 hours. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 6006822 | ||
| Temperature cycles | -55deg.C+/-2deg.C (30min) +125deg.C+/-2deg.C (30min) 25 cycles. And Temperature Increasing/reducing time3mins. Back to the room temperature first, then check the component after 1~2 hours. | Refer to: JIS C 0025 | ||
| Dimensions | 3.20.2 (Length) x 2.50.2 (Width) x 1.2 (Height) mm | mm | ||
| Pin Connections | Pin 1: OE (Output Enable), Pin 2: Output, Pin 3: GND, Pin 4: Vdd | |||
| Marking | Laser marking with Date Code (Year, Month) | |||
| Carrier Tape Material | Carrier tape: PS, Conductive Top tape: PET | |||
| Standard Packing Quantity | 3,000 PCS / REEL |
2410121502_HELE-SSW048000I3CHE-T_C253921.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
