<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±30ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
12pF
Frequency:
12MHz
Mfr. Part #:
X5H012000FC1H-X
Package:
SMD5032-2P
Key Attributes
Model Number:
X5H012000FC1H-X
Product Description
Product Overview
The HSX530G is a Quartz Crystal Unit from HARMONY ELECTRONICS CORP., designed for general product applications. This specification sheet details its electrical, mechanical, and environmental characteristics, ensuring reliable performance in various electronic systems. It is manufactured with a ceramic base and cap, utilizing a rectangular AT-cut quartz crystal blank for oscillation.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX530G
- Country of Origin: TAIWAN
- Manufacturing Locations: THAILAND FACTORY, CHINA FACTORY
- Specification Number: X5H012000FC1H-X
- Revision: 0
- Date: 2012/10/15
- Moisture Sensitivity Level: Level 1
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Frequency | 12.000000MHz | |
| Holder Type | HSX530G | Ceramic Base |
| Frequency Tolerance | +/-30ppm | at 25C 3C |
| Equivalent Resistance | 100 ohms Max. | / SERIES |
| Storage Temperature Range | -40C To +85C | |
| Operable Temperature Range | -40C To +85C | |
| Temperature Drift | +/-50ppm | -40C To +85C |
| Loading Capacitance (CL) | 12.0pF | |
| Drive Level | 10 uW | (300uW Max) |
| Shunt Capacitance | 7.0 pF Max | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Circuit Measurement | HP/E5100A, S&A 250B | |
| Shocking (Drop Test) | Frequency: < +/-5 ppm Resistance: < +/- 15 % or 2ohms max. | Dropping from 50 cm height 3 times on firm wood |
| Aging | Less than +/-5 ppm/Year | |
| Inside Structure - Base Material | Alumina Ceramic (Al2O3) | |
| Inside Structure - Cap Material | Alumina Ceramic (Al2O3) | |
| Inside Structure - Crystal Blank | Rectangular At-Cut Quartz Crystal Blank | |
| Emboss Carrier Tape & Reel - Standard Packing Quantity | 1,000 PCS / REEL | |
| Emboss Carrier Tape & Reel - Storage Condition | Temperature: +40 Max. Relative Humidity: 80% Max. | |
| Emboss Carrier Tape & Reel - Tape Material | Carrier tape: PS Top tape: PET | |
| Emboss Carrier Tape & Reel - Release Strength of Cover Tape | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Endurance - Drop | Satisfied | Dropping 3 times from 50 cm onto hard wooden board (>30mm thick) |
| Mechanical Endurance - Vibration | Satisfied | Frequency: 10~55Hz, Cycle: 1-2 Min, Amplitude: 0.8mm, Direction: X.Y.Z, Time: 2 Hours/Each Direction |
| Mechanical Endurance - Substrate Bending | Satisfied | Pressure applied to substrate, Speed: 0.5 mm/sec, Duration: 5 1 sec, Amount of substrate: 3 mm Max. |
| Mechanical Endurance - Adhesion | Satisfied | Weight: 5N, Duration: 10 1 sec |
| Mechanical Endurance - Body Strength | Satisfied | Weight: 10N, Duration: 10 1 sec |
| Mechanical Endurance - Seal | Less than 1.0 x 10-8 Pa.m3/sec | By Helium leak detector. No serial bubble by Fluorinate tests. |
| Mechanical Endurance - Solder Ability | Satisfied | 3 sec +/-0.5sec. Dip in 245C+/-5C solder (ROSIN type flux) |
| Mechanical Endurance - Resistance to Soldering Heat | Available for Lead Free Soldering | Reflow soldering allowed twice. Preheat 160~180C (120sec), Primary heat 220C (60sec), Peak 260C (10sec Max). |
| Environmental Endurance - Humidity | Satisfied | +60C+/-2C, 90% ~ 95% RH for 240 hours |
| Environmental Endurance - Storage in Low Temperature | Satisfied | -40C+/-2C for 240 hours |
| Environmental Endurance - Storage in High Temperature | Satisfied | +85C+/-2C for 240 hours |
| Environmental Endurance - Thermal Shock | Satisfied | 25 cycles of temperature cycling (-40C to +85C), Temp. change within 3 minutes. |
2410121342_HELE-X5H012000FC1H-X_C254396.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
