<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±50ppm
Load Capacitance:
20pF
Operating Temperature:
-40℃~+85℃
Frequency:
8MHz
Mfr. Part #:
X5H008000FK1H-X
Package:
SMD5032-2P
Key Attributes
Model Number:
X5H008000FK1H-X
Product Description
Product Overview
The HSX530G is a Quartz Crystal Unit manufactured by HARMONY ELECTRONICS CORP. Designed for general applications, this crystal operates at a nominal frequency of 8.000000MHz. It features a durable ceramic base and cap construction, ensuring reliability in various operating conditions. The HSX530G is suitable for applications requiring precise frequency control and stability.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX530G
- Type: Quartz Crystal Unit
- Country of Origin: TAIWAN
- Manufacturing Locations: Taiwan, Thailand, Shenzhen
- Holder Type: HSX530G
- Base Material: Alumina Ceramic (Al2O3)
- Cap Material: Alumina Ceramic (Al2O3)
- Crystal Blank: Rectangular At-Cut Quartz Crystal Blank
- Marking Method: Laser Marking
Technical Specifications
| Specification | Value | Unit | Notes |
|---|---|---|---|
| Nominal Frequency | 8.000000 | MHz | |
| Frequency Tolerance | +/-30 | ppm | at 25C 3C |
| Equivalent Resistance | 150 | Ohms | Max. / SERIES |
| Storage Temperature Range | -40 to +85 | C | |
| Operable Temperature Range | -40 to +85 | C | |
| Temperature Drift | +/-50 | ppm | -40C To +85C |
| Loading Capacitance (CL) | 20.0 | pF | |
| Drive Level | 10 | uW | (300uW Max) |
| Shunt Capacitance | 7.0 | pF | Max. |
| Insulation Resistance | > 500 | M Ohms | at DC 100V |
| Mode of Oscillation | Fundamental | ||
| Circuit Measurement | Measured in HP/E5100A, S&A 250B | ||
| Shock Test (Dropping) | 50 cm height, 3 times | Frequency variation < +/-5 ppm, Resistance variation < +/- 15% or 2 ohms max. | |
| Aging | < +/-5 | ppm/Year | |
| Carrier Tape Width | 12.8 | +/-0.3 mm | W1 |
| Reel Diameter | 180 | +0/-3 mm | 180 |
| Standard Packing Quantity | 1,000 | PCS | / REEL |
| Cover Tape Release Strength | 0.1 to 0.7 | N | Pulling direction 165 to 180, Speed 300mm/min. |
| Mechanical Endurance (Drop Test) | 50 cm height | 3 times onto hard wooden board (thickness > 30mm) | |
| Mechanical Endurance (Vibration) | 10~55Hz, 0.8mm amplitude, 2 hours/direction (X,Y,Z) | ||
| Mechanical Endurance (Substrate Bending) | 3 mm max. deflection | Speed: 0.5 mm/sec, Duration: 5 1 sec | |
| Mechanical Endurance (Adhesion) | 5N weight | Duration: 10 1 sec | |
| Mechanical Endurance (Body Strength) | 10N weight | Duration: 10 1 sec | |
| Seal Test | < 1.0 x 10-8 Pa.m/sec | Helium leak detector. No serial bubble by Fluorinate tests. | |
| Solder Ability | 3 sec +/-0.5 sec | Dip in 245C+/-5C solder (ROSIN type flux) | |
| Resistance to Soldering Heat (Reflow) | Max. 2 times | Preheat: 160~180C (120sec), Primary heat: 220C (60sec), Peak: 260C (10sec Max.) | |
| Environmental Endurance (Humidity) | +60C+/-2C, 90% ~ 95% RH for 240 hours | Frequency variation within +/-5ppm, equivalent resistance within specification. | |
| Environmental Endurance (Low Temp Storage) | -40C+/-2C for 240 hours | Frequency variation within +/-5ppm, equivalent resistance within specification. | |
| Environmental Endurance (High Temp Storage) | +85C+/-2C for 240 hours | Frequency variation within +/-5ppm, equivalent resistance within specification. | |
| Environmental Endurance (Thermal Shock) | 25 cycles (-40C to +85C) | Temp. increasing/reducing time within 3 minutes. |
2410121342_HELE-X5H008000FK1H-X_C254390.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
