<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Load Capacitance:
8pF
Operating Temperature:
-30℃~+85℃
Frequency:
32MHz
Mfr. Part #:
X2C032000B81H-HS
Package:
SMD2016-4P
Key Attributes
Model Number:
X2C032000B81H-HS
Product Description
Product Overview
The HSX211S is a quartz crystal unit from HARMONY ELECTRONICS CORP., designed for reliable frequency generation in various electronic products. With a nominal frequency of 32.000MHz and a frequency tolerance of +/-10 ppm at 25C, it offers stable performance. This crystal unit is suitable for applications requiring precise timing and is available in a compact holder type (HSX211S) with specific mechanical and environmental endurance characteristics.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX211S
- Country of Origin: TAIWAN
- Manufacturing Locations: THAILAND FACTORY, CHINA FACTORY
- Moisture Sensitivity Level: Level 1
- Certifications: ROHS Compliant, Green Product
Technical Specifications
| Specification | Value | Notes |
|---|---|---|
| Frequency | 32.000000MHz | |
| Holder Type | HSX211S | |
| Frequency Tolerance | +/-10 ppm | at 25C +/-3C |
| Equivalent Resistance | 50 ohms Max. | SERIES |
| Storage Temperature Range | -40C To +85C | |
| Operable Temperature Range | -30C To +85C | |
| Temperature Drift | +/-15 ppm | -30C To +85C |
| Loading Capacitance (CL) | 8.0 pF | |
| Drive Level | 10W | 100W Max. |
| Shunt Capacitance | 2.0 pF Max. | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Circuit Measurement | Measured in HP/E5100A, S&A 250B | |
| Shocking (Drop Test) | Frequency < +/-5 ppm, Resistance < +/-15% or 2ohms max. | Dropping from 120 cm height 3 times on Concrete floor |
| Aging | Less than +/- 3 ppm/Year | |
| Holder Type | HSX211S | Seam type |
| Dimensions & Marking | Refer to page 4 | |
| Emboss Carrier Tape & Reel | Refer to pages 6 & 7 | |
| Standard Packing Quantity | 3,000 PCS / REEL | |
| Storage Condition | Temperature: +40C Max., Relative Humidity: 80% Max. | |
| Tape Material | Carrier tape: PS, Top tape: Polyester | |
| Cover Tape Release Strength | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Endurance (Drop Test) | Frequency variation < +/-5ppm, Resistance variation < +/-15% or 2 max. | 120 cm height, 3 times on concrete floor |
| Mechanical Endurance (Vibration) | 10-55Hz, 0.8mm amplitude, 2 hours per axis (X, Y, Z) | |
| Mechanical Endurance (Sealing Tightness) | Leak Rate: 1.0x10 Pa-m/sec. Max. | Measured by Helium leak detector |
| Mechanical Endurance (Solderability) | 245C+/-5C for 3+/-0.5 sec. | |
| Mechanical Endurance (Substrate Bending) | 3mm bend, 5 1 sec. | |
| Mechanical Endurance (Adhesion) | Pressure: 5N for 101 sec. | |
| Mechanical Endurance (Body Strength) | Pressure: 10N for 101 sec. | |
| Environmental Endurance (Humidity) | Frequency variation within +/-5ppm, equivalent resistance within +/-15% or 2 | 60C +/-2C, 90~95% RH, 240 hours |
| Environmental Endurance (Low Temp Storage) | -40C +/-2C, 240 hours | |
| Environmental Endurance (High Temp Storage) | +85C +/-2C, 240 hours | |
| Environmental Endurance (Temperature Cycles) | -40C to +85C, 25 cycles | |
| Soldering (Reflow) | Max. 2 times | Proposed reflow condition |
| Soldering (Iron) | Bit temp.: 350max., Time: 3sec max. | Each terminal solder 1 time max. |
2410121327_HELE-X2C032000B81H-HS_C254298.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
