<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+75℃
Load Capacitance:
12pF
Frequency:
28.63636MHz
Mfr. Part #:
X2B02863ADC1H-W
Package:
SMD2520-4P
Key Attributes
Model Number:
X2B02863ADC1H-W
Product Description
HSX221SA Quartz Crystal Specification
Product Overview
The HSX221SA is a quartz crystal unit manufactured by HARMONY ELECTRONICS CORP. Designed for various product applications, this crystal operates at a nominal frequency of 28.636360 MHz. It features a holder type of HSX221SA and is suitable for integration into electronic devices requiring stable frequency generation. The product is available from factories located in Taiwan, Thailand, and China.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX221SA
- Country of Origin: TAIWAN
- Manufacturing Locations: Taiwan, Thailand, China
- Moisture Sensitivity Level: Level 1
- Compliance: ROHS Compliant, Green Product
Technical Specifications
| Specification | Value | Notes |
|---|---|---|
| Nominal Frequency | 28.636360 MHz | |
| Holder Type | HSX221SA | Seam type |
| Frequency Tolerance | +/-20 ppm | at 25C +/-3C |
| Equivalent Resistance | 80 ohms Max. | / SERIES |
| Storage Temperature Range | -40C To +125C | |
| Operable Temperature Range | -20C To +70C | |
| Temperature Drift | +/-20ppm | -20C To +70C |
| Loading Capacitance (CL) | 12.0 pF | |
| Drive Level | 10 W | (100W Max.) |
| Shunt Capacitance | 2.0 pF Max. | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Shock Test (Frequency Variation) | Less than +/-5 ppm | Dropping from 120 cm height 3 times on Concrete floor |
| Shock Test (Resistance Variation) | Less than +/- 15 % or 2ohms max. | Dropping from 120 cm height 3 times on Concrete floor |
| Aging | Less than +/- 3 ppm/Year | |
| Dimensions | Refer to page 4 | |
| Marking | Refer to page 4 | Laser marking |
| Emboss Carrier Tape & Reel | Refer to page 6 and 7 | |
| Standard Packing Quantity | 3,000 PCS / REEL | |
| Carrier Tape Material | PS | |
| Top Tape Material | Polyester | Conductive |
| Cover Tape Release Strength | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Endurance - Natural Drop | Refer to JIS C 60068-2-6 A | Dropping from 120 cm height 3 times on Concrete floor |
| Mechanical Endurance - Vibration | Refer to MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. |
| Mechanical Endurance - Sealing Tightness | 1.0x10-8 Pa-m/sec. Max. | Measured by Helium leak detector. |
| Mechanical Endurance - Solder Ability | Refer to JIS C 60068-2-20 B | Applying ROSIN Flux, dipping in solder bath at 245C+/-5C for 3+/-0.5 sec. |
| Mechanical Endurance - Substrate Bending | Refer to EIAJ ET-7403 A | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed :0.5 mm / sec |
| Mechanical Endurance - Adhesion | Refer to EIAJ ET-7403 A | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure : 5N for 101 sec |
| Mechanical Endurance - Body Strength | Refer to EIAJ ET-7403 A | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec |
| Environmental Performance - Humidity | Refer to JIS C 60068-2-3 A | Temperature 60 +/- 2 , RH 90~95%, Duration of 240 hours. |
| Environmental Performance - Storage in Low Temperature | Refer to JIS C 60068-2-1 A | -40C +/-2C, Duration of 240 hours. |
| Environmental Performance - Storage in High Temperature | Refer to JIS C 60068-2-2 A | +85C +/-2C, Duration of 240 hours. |
| Environmental Performance - Temperature Cycles | Refer to JIS C 0025 A | -40C +/-2C (30min) +85C +/-2C (30min) 25 cycles. |
| Soldering Condition (Reflow) | Refer to page 12 | Available for Lead Free Soldering |
| Soldering Condition (Solder Iron) | Bit temp.: 350max., Time:3sec max. | Each terminal solder a 1 time max. |
| Mounting | Designed for automatic insertion | Avoid mounting and processing by Ultrasonic welding. |
| Cleaning | Cleaning liquid which corrodes Nickel shall not be used. Ultra-sonic cleaning is possible, but check on your board. | |
| Storage | Keep away from high temperature and high humidity, direct sunlight, No dew. |
2410121327_HELE-X2B02863ADC1H-W_C254276.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
