<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±50ppm
Load Capacitance:
20pF
Operating Temperature:
-40℃~+85℃
Frequency:
15.36MHz
Mfr. Part #:
X5H015360FK1H-X
Package:
SMD5032-2P
Key Attributes
Model Number:
X5H015360FK1H-X
Product Description
Product Overview
The HSX530G Quartz Crystal from Harmony Electronics Corp. is a high-frequency component designed for various electronic applications. It offers a stable frequency of 15.360MHz with precise tolerances, operating across a wide temperature range. Built with a ceramic base and cap, it ensures durability and reliable performance in demanding environments. This crystal unit is suitable for applications requiring accurate timekeeping and signal generation.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX530G
- Type: QUARTZ CRYSTAL
- Country of Origin: TAIWAN
- Manufacturing Locations: THAILAND FACTORY, SHENZHEN FACTORY
- Holder Type: HSX530G Ceramic Base
- Crystal Blank: Rectangular At-Cut Quartz Crystal Blank
- Base Material: Alumina Ceramic (Al2O3)
- Cap Material: Alumina Ceramic (Al2O3)
- Adhesive: Silver Conductive Silicon Resin
- Marking: Laser marking
Technical Specifications
| Specification | Value |
|---|---|
| Frequency | 15.360000MHz |
| Frequency Tolerance | +/-30ppm at 25deg.C+/- 3deg.C |
| Equivalent Resistance | 100 ohms Max. / SERIES |
| Storage Temperature Range | -40deg.C To +85deg.C |
| Operable Temperature Range | -40deg.C To +85deg.C |
| Temperature Drift | +/-50ppm (-40deg.C To +85deg.C) |
| Loading Capacitance (CL) | 20.0pF |
| Drive Level | 10 uW (300uW Max) |
| Shunt Capacitance | 7.0 pF Max. |
| Insulation Resistance | More than 500M ohms at DC 100V |
| Mode of Oscillation | Fundamental |
| Shock Test Variation (Frequency) | Less than +/-5 ppm |
| Shock Test Variation (Resistance) | Less than +/- 15 % or 2ohms max. |
| Aging | Less than +/-5 ppm/Year |
| Carrier Tape Inner Width (W1) | 12.8+/-0.3 mm |
| Carrier Tape Outer Width (W2) | 15.5+/-1.0 mm |
| Reel Diameter (A) | 180+0/-3 mm |
| Reel Inner Width (W1) | 12.8+/-0.3 mm |
| Reel Outer Width (W2) | 15.5+/-1.0 mm |
| Reel Out Line Diameter (B) | 60.5+/-0.5 mm |
| Reel Spindle Diameter (C) | 13.2+/-0.5 mm |
| Reel Key Ditch Width (E) | 3.0+/-0.2 mm |
| Storage Condition Temperature | +40 Max. |
| Storage Condition Relative Humidity | 80% Max. |
| Standard Packing Quantity | 1,000 PCS / REEL |
| Carrier Tape Material | PS |
| Top Tape Material | PET |
| Cover Tape Release Strength | 0.1N to 0.7N |
| Mechanical Endurance - Drop Test | Satisfied after dropping from 50 cm onto hard wooden board (more than 30mm thickness) 3 times. |
| Mechanical Endurance - Vibration Test | Satisfied after 10~55Hz, 0.8mm amplitude, 2 hours/direction (X,Y,Z). |
| Mechanical Endurance - Substrate Bending | Satisfied under 3mm max. substrate bending at 0.5 mm/sec for 5 1 sec. |
| Mechanical Endurance - Adhesion Test | Satisfied under 5N weight for 10 1 sec. |
| Mechanical Endurance - Body Strength Test | Satisfied under 10N weight for 10 1 sec. |
| Seal Test | Less than 1.0 x 10-8 Pa.m3/sec by Helium leak detector. |
| Solderability | Satisfied after dipping in 245deg.C+/-5deg.C solder for 3sec +/-0.5sec. |
| Resistance to Soldering Heat (Reflow) | Allowed up to two (2) times. Max Peak: 260 deg.C for 10 sec. |
| Environmental Endurance - Humidity Test | Satisfied after 240 hours at +60deg.C+/-2deg.C, 90% ~ 95% humidity. |
| Environmental Endurance - Storage in Low Temperature | Satisfied after 240 hours at 40deg.C+/-2deg.C. |
| Environmental Endurance - Storage in High Temperature | Satisfied after 240 hours at +85deg.C+/-2deg.C. |
| Environmental Endurance - Thermal Shock | Satisfied after 25 cycles (-40+/-2 to +85+/-2). |
2410121342_HELE-X5H015360FK1H-X_C254391.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
