<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±10ppm
Load Capacitance:
9pF
Operating Temperature:
-20℃~+75℃
Frequency:
16MHz
Mfr. Part #:
X2C016000B91H-R
Package:
SMD2016-4P
Key Attributes
Model Number:
X2C016000B91H-R
Product Description
Product Overview
The Harmony Electronics HSX211S Quartz Crystal is a high-performance frequency control component designed for reliable operation in various electronic applications. Manufactured by Harmony Electronics Corporation, this crystal unit offers a nominal frequency of 16.000000MHz and adheres to stringent quality and environmental standards, including RoHS compliance and Pb-free manufacturing. Its robust construction and stable performance make it suitable for demanding industrial and commercial uses.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Quartz Crystal
- Model: HSX211S
- Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- Green Product: Yes
Technical Specifications
| Specification | Value | Unit | Notes |
|---|---|---|---|
| Nominal Frequency | 16.000000 | MHz | |
| Mode of Oscillation | Fundamental | ||
| Frequency Tolerance | -10 to +10 | ppm | at 253 |
| Equivalent Resistance (RR) | 200 | SERIES | |
| Storage Temperature Range | -40 to +85 | ||
| Operable Temperature Range | -20 to +75 | ||
| Temperature Stability | -10 to +10 | ppm | -20 ~ +75 |
| Loading Capacitance (CL) | 9.0 | pF | |
| Drive Level (DL) | 10 to 100 | W | |
| Shunt Capacitance (C0) | 2.0 | pF | |
| Insulation Resistance | 500 | M | at DC 100V |
| Aging | -3 to +3 | ppm/Year | |
| Dimensions (L x W) | 1.65 x 2.05 | mm | |
| Pin Connections | #1, #2, #3, #4 | #1,#2,#4 GND/Lid, #3 Crystal | |
| MSL Level | 01 | ||
| Shock Resistance | Dropping from 120 cm height 3 times on 30 mm Concrete floor | Refer to: JIS C 60068-2-6 A | |
| Vibration Resistance | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, 2 cycles and duration of 120 mins to each direction | Refer to: MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A | |
| Leakage Test | 1.0x10-9 | Pa-m3/sec. Max. | Measured by Helium leak detector. |
| Solder Ability | Dipping in solder bath at 245deg.C 5deg.C for 3 0.5 sec. | Refer to: JIS C 60068-2-20 B | |
| Bending Strength | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed: 0.5 mm/sec. | Refer to: EIAJ ET-7403 A | |
| Adhesion Strength | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure: 5N for 101 sec. | Refer to: EIAJ ET-7403 A | |
| Body Strength | Apply pressure to the center of body with the R0.5 pressure jig. Pressure: 5N for 101sec | Refer to: EIAJ ET-7403 A | |
| Humidity Test | Temperature 60 2, RH 90~95%, duration of 240 hours. | Refer to: JIS C 60068-2-3 A | |
| Low Temperature Storage | -40deg.C 2deg.C, duration of 240 hours. | Refer to: JIS C 60068-2-1 A | |
| High Temperature Storage | +85deg.C 2deg.C, duration of 240 hours. | Refer to: JIS C 60068-2-2 A | |
| Temperature Cycles | -40deg.C 2deg.C (30min) +85deg.C 2deg.C (30min) 25 cycles. Temperature Increasing/reducing time3mins. | Refer to: JIS C 0025 A | |
| Standard Packing Quantity | 3,000 | PCS / REEL |
2410121447_HELE-X2C016000B91H-R_C254270.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
