<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±10ppm
Load Capacitance:
10pF
Operating Temperature:
-30℃~+85℃
Frequency:
48MHz
Mfr. Part #:
X2C048000BA1H-HZ
Package:
SMD2016-4P
Key Attributes
Model Number:
X2C048000BA1H-HZ
Product Description
Product Overview
The HSX211S is a quartz crystal unit manufactured by HARMONY ELECTRONICS CORP., designed for reliable frequency control in various electronic products. This specification sheet details its electrical characteristics, mechanical endurance, environmental performance, and packaging information, ensuring its suitability for demanding applications. The crystal operates on a fundamental mode and is available with a nominal frequency of 48.000MHz.
Product Attributes
- Brand: HARMONY ELECTRONICS CORP.
- Model: HSX211S
- Type: Quartz Crystal Unit
- Country of Origin: TAIWAN
- Specification Number: X2C048000BA1H-HZ Rev. 0
- Date Issued: 2012/01/11
Technical Specifications
| Parameter | Value | Notes |
|---|---|---|
| Frequency | 48.000000MHz | |
| Holder Type | HSX211S | |
| Frequency Tolerance | +/-10ppm | at 25deg.C +/-3deg.C |
| Equivalent Resistance | 30 ohms Max. | /SERIES |
| Storage Temperature Range | -40 deg.C To +85 deg.C | |
| Operable Temperature Range | -30 deg.C To +85 deg.C | |
| Temperature Drift | +/-10 ppm | -30 deg.C To +85deg.C |
| Loading Capacitance (CL) | 10.0 pF | |
| Drive Level | 10 W | (300uW Max) |
| Shunt Capacitance | 2.0 pF Max | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Circuit Measurement | Measured in HP/E5100A,S&A 250B | |
| Shocking (Drop Test) | Frequency variation less than +/-5 ppm; Resistance less than +/- 15 % or 2ohms max. | Dropping from 50 cm height 3 times on firm wood |
| Aging | Less than +/- 1 ppm/Year | |
| Holder | HSX211S | Seam type |
| Base Material | Alumina Ceramic (Al2O3) | |
| Cap Material | Fe- Ni -Co | |
| Crystal Blank | Rectangular At-Cut Quartz Crystal Blank | |
| Adhesive | Silver Conductive Silicon Resin | |
| PAD Material | Alumina Ceramic (W. Ni. Au) | |
| Cover Ring Material | Fe-Ni-Co Alloy | |
| Standard Packing Quantity | 3,000 PCS / REEL | |
| Carrier Tape Material | PS | |
| Top Tape Material | Polyester | |
| Release Strength of Cover Tape | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Endurance (Drop Test) | Frequency variation within +/-5ppm; Equivalent resistance within specification | Drop 3 times from 50cm onto hard wooden board |
| Mechanical Endurance (Vibration Test) | Frequency variation within +/-5ppm; Equivalent resistance within specification | 10-55Hz, 0.8mm amplitude, 2 hours per axis (X, Y, Z) |
| Mechanical Endurance (Sealing Tightness) | Leak Rate 1.0x10-8 Pa-m3/sec. Max. | Measured by Helium leak detector |
| Mechanical Endurance (Solderability) | More than 90% of lead covered by new solder | Dipping in solder bath at 245deg.C+/-5deg.C for 3+/-0.5 sec. with ROSIN Flux |
| Environmental Endurance (Humidity) | Frequency variation within +/-5ppm; Equivalent resistance within specification | 60 deg.C, 90~95% RH for 240 hours |
| Environmental Endurance (Storage in Low Temp.) | Frequency variation within +/-5ppm; Equivalent resistance within specification | -40 deg.C +/-2deg.C for 240 hours |
| Environmental Endurance (Storage in High Temp.) | Frequency variation within +/-5ppm; Equivalent resistance within specification | +85 deg.C +/-2deg.C for 240 hours |
| Environmental Endurance (Temperature Cycles) | Frequency variation within +/-5ppm; Equivalent resistance within specification | -40 deg.C (30min) +85 deg.C (30min), 25 cycles |
2410121327_HELE-X2C048000BA1H-HZ_C254314.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
