<
>
Specifications
Power(Watts):
250mW
Resistance:
1.6MΩ
Voltage Rating:
500V
Temperature Coefficient:
±200ppm/℃
Operating Temperature:
-55℃~+125℃
Tolerance:
±1%
Mfr. Part #:
HCR32-165FV
Package:
1206
Key Attributes
Model Number:
HCR32-165FV
Product Description
Product Overview
The HCR Type series of corner type High Voltage CR resistors are designed for electronic equipment applications. This product standard specifies the requirements for these resistors, including their scope, relevant documents, model designation, ratings, appearance, marking, performance, packing, operating instructions, and industrial property rights.
Product Attributes
- Brand: HOKURIKU ELECTRIC INDUSTRY CO., LTD.
- Origin: Not specified
- Material: Various materials including Ceramics board (Alumina 96%), Glass-based (Ag, Ag-Pd, I), Resin-based (II, Stamp, Side electrode), Ruthenium oxide (Resistor), Ni plated (Internal electrode), and Sn plating (External electrode).
- Color: Not specified (marking color is White)
- Certifications: None explicitly mentioned, but references JIS standards.
Technical Specifications
| Model | Rated Power (W) | Resistance Allowance | Resistance Range () | Temperature Coefficient (ppm/C) | Maximum Operating Voltage (V) | Maximum Overload Voltage (V) | Dimensions [mm] (L x W x c x d x t) | Form of Packing |
| HCR32 | 0.250 | F (1%) | 160k20M | 200 | 500 | 1000 | 3.20.10 x 1.60.10 x 0.50.2 x 0.50.2 x 0.500.10 | Paper taping, Bulk |
| HCR32 | 0.250 | J (5%) | 160k20M | 200 | 500 | 1000 | 3.20.10 x 1.60.10 x 0.50.2 x 0.50.2 x 0.500.10 | Paper taping, Bulk |
| Item | Performance | Test Method (JIS C 5201-1) | Test Voltage/Conditions |
| Resistance | Within specified resistance allowance | As per 4.5. | 160k or more, Less than 20M: 50V |
| Temperature coefficient at zeroeth order of the resistance | As per clause 4-1 | As per 4.8. Test board B, Condition B. | Not specified |
| Overload | Shall be free of considerable appearance anomalies and shall be legible. R/R (2.5%+0.1) | A voltage of twice the limiting element voltage shall be applied for 2 seconds. | Maximum overload voltage and rated current as per clause 4-1. |
| Insulation resistance | Between the electrodes and insulation board: 1000M or more | As per 4.13. | DC voltage of 10015V, held for about 1 minute. |
| Dielectric strength | Shall be no flashover, burn, dielectric breakdown, or other anomaly. | As per 4.6. | AC voltage (effective power frequency): HCR32: 500V. Applied by increasing from 0V to specified level in 1 second, held for 1 minute 10 seconds, then reduced to 0V. |
2410121610_HDK-HCR32-165FV_C150392.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
