<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±30ppm
Load Capacitance:
20pF
Operating Temperature:
-20℃~+75℃
Frequency:
24MHz
Mfr. Part #:
X2B024000FK1H-V
Package:
SMD2520-4P
Key Attributes
Model Number:
X2B024000FK1H-V
Product Description
Harmony Electronics Corp. HSX221SA Quartz Crystal
The Harmony Electronics Corp. HSX221SA is a quartz crystal unit designed for various electronic applications. It operates at a nominal frequency of 24.000MHz and is housed in the HSX221SA holder type. This component is suitable for applications requiring stable frequency generation and is manufactured by Harmony Electronics Corp., with production facilities in Taiwan, Thailand, and China.
Product Attributes
- Brand: Harmony Electronics Corp.
- Model: HSX221SA
- Country of Origin: TAIWAN
- Manufacturing Locations: Taiwan, Thailand, China
- Date of Specification: 2016/06/15
- Specification Number: X2B024000FK1H-V
- Revision: 0
- Moisture Sensitivity Level: Level 1
Technical Specifications
| Specification | Details |
|---|---|
| Frequency | 24.000000MHz |
| Holder Type | HSX221SA |
| Frequency Tolerance | +/-30 ppm at 25C +/-3C |
| Equivalent Resistance | 150 Ohms Max. / SERIES |
| Storage Temperature Range | -40C To +125C |
| Operable Temperature Range | -20C To +75C |
| Temperature Drift | +/-30ppm (-20C To +75C) |
| Loading Capacitance (CL) | 20.0 pF |
| Drive Level | 10 W (100W Max.) |
| Shunt Capacitance | 2.0 pF Max. |
| Insulation Resistance | More than 500M Ohms at DC 100V |
| Mode of Oscillation | Fundamental |
| Circuit Measurement | HP/E5100A, S&A 250B |
| Shock Test (Dropping) | 120 cm height, 3 times on Concrete floor. Frequency variation < +/-5 ppm, Resistance variation < +/-15% or 2ohms max. |
| Aging | Less than +/- 3 ppm/Year |
| Holder Type | HSX221SA Seam type |
| Dimensions and Marking | Refer to page 4 |
| Emboss Carrier Tape & Reel | Refer to page 6 and 7 |
| Standard Packing Quantity | 3,000 PCS / REEL |
| Carrier Tape Material | PS Conductive |
| Top Tape Material | Polyester |
| Reel Diameter | 180+/-0/-3 mm |
| Reel Inner Width | 9.3+/-0.3 mm |
| Reel Outer Width | 11.3+/-1.0 mm |
| Reel Hub Out Line Diameter | 60.5+/-0.5 mm |
| Storage Condition | Temperature: +40C Max., Relative Humidity: 80% Max. |
| Cover Tape Release Strength | 0.1N to 0.7N (Pulling direction 165 to 180, Speed 300mm/min) |
| Mechanical Endurance - Natural Drop | 120 cm height, 3 times on Concrete floor (JIS C 60068-2-6 A) |
| Mechanical Endurance - Vibration | 10-55Hz, Sine Wave, 0.8mm amplitude, 2 hours/axis (MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A) |
| Mechanical Endurance - Sealing Tightness | Leak Rate 1.0x10^-8 Pa-m/sec. Max. (Helium leak detector) |
| Mechanical Endurance - Solder ability | Dipped in solder bath at 245C+/-5C for 3+/-0.5 sec. (JIS C 60068-2-20 B) |
| Mechanical Endurance - Substrate Bending | 3 mm bend, 5 1 sec (EIAJ ET-7403 A) |
| Mechanical Endurance - Adhesion | 5N pressure for 101 sec (EIAJ ET-7403 A) |
| Mechanical Endurance - Body Strength | 10N pressure for 101 sec (EIAJ ET-7403 A) |
| Environmental Performance - Humidity | 60C +/-2C, 90~95% RH, 240 hours (JIS C 60068-2-3 A) |
| Environmental Performance - Storage in Low Temperature | -40C +/-2C, 240 hours (JIS C 60068-2-1 A) |
| Environmental Performance - Storage in High Temperature | +85C +/-2C, 240 hours (JIS C 60068-2-2 A) |
| Environmental Performance - Temperature Cycles | -40C (30min) +85C (30min), 25 cycles (JIS C 0025 A) |
| Soldering Reflow Condition | Preheat: 160~180C (120sec), Primary heat: 220C (60sec), Peak: 260C (10sec Max.) |
| Soldering Iron Condition | Bit temp.: 350C max., Time: 3sec max. per terminal |
2410121327_HELE-X2B024000FK1H-V_C254272.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
