<
>
Specifications
Frequency:
133MHz
Mfr. Part #:
8S133000301
Package:
SMD2520-4P
Key Attributes
Model Number:
8S133000301
Product Description
Product Overview
This specification applies to the RoHS crystal oscillator with a frequency of 133.000MHz, designed for use in electronic equipment. The QMEMS2520 series oscillator features a compact SMD package and CMOS output waveform.
Product Attributes
- Brand: JIANGSU HD-CRYSTAL TECHNOLOGY CO.,LTD
- Origin: China
- Certifications: RoHS
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Product Name | Quartz Crystal Oscillator | QMEMS2520 / 8S series |
| Nominal Frequency | 133.000MHz | |
| Frequency Stability | 30ppm | (incl. 25C tolerance, tolerance over operating temperature range, input voltage change, load change, 1 year aging) |
| Aging | 3ppm/year | |
| Operating Temperature Range | -40 to +85C | |
| Storage Temperature Range | -55 to +125C | |
| Input Voltage (VDD) | +3.3Vdc10% | |
| Input Current (IDD) | 36mA max | |
| Output Waveform | CMOS | |
| Output Symmetry | 505% | |
| Rise/Fall Time | 5ns max | |
| Output Voltage | 10%VDD (VOL) / 90%VDD (VOH) | |
| Output Load | 15pF | |
| Output State Control | Enable/disable | |
| Start-up Time | 58ms max | |
| Phase Jitter (rms) | 1ps rms max | 12kHz to 20MHz |
| Oscillation mode | Fundamental | |
| Package | SMD | 2.52.0 |
| Reliability - Low Temperature Storage | Frequency change after test 5ppm | 72 hrs at -55C3C |
| Reliability - High Temperature Storage | Frequency change after test 5ppm | 72 hrs at 125C3C |
| Reliability - Humidity | Frequency change after test 5ppm | 96 hrs at 40 C 3 C, 90 3% R.H. |
| Reliability - Temperature Cycle | Frequency change after test 5ppm | 10 cycles from -55C to 125C |
| Reliability - Vibration | Frequency change after test 5ppm | 0.75mm vibration at sweep frequency 10500 Hz, for 2h |
| Reliability - Shock | Frequency change after test 5ppm | Peak 1000m/s2, 6ms half sine wave |
| Reliability - Solderability | Terminals shall be covered more then 95% with solder. | 245 5 solder bath for 2 0.5 seconds. |
| Reliability - Resistance to Soldering Heat | Frequency change after test 5ppm. No visible damages. | Reflow oven: Preheat 150C5C for 60-120s, Peak 265C5C for 10s3sec. |
| Reliability - Terminal Strength | No visible damage | 0.5 kg pulling force for 60 seconds. |
| Reliability - Drop | No visible damages. | Free drop from 1.0 m height to wooden plate, 3 times. |
| Others | Not recommended for safety applications |
2411121116_HD-8S133000301_C5184801.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
