Product Overview
The HSO321S Crystal Oscillator from Harmony Electronics Corporation is a high-performance frequency control component designed for various electronic applications. It offers a nominal frequency of 12.288000MHz with excellent frequency stability. This product is Pb-free, RoHS compliant, HF-Halogen free, and REACH compliant, reflecting a commitment to environmental standards. It is manufactured in Taiwan.
Product Attributes
- Brand: Harmony Electronics Corporation
- Product Type: Crystal Oscillator
- Model: HSO321S
- Internal Part Number: SSW012288I3CHE-T
- Sample Order Number: EOS-I50057-13
- Country of Origin: Taiwan
- Certifications: Pb free, RoHS Compliant, HF-Halogen free, REACH Compliant
- MSL Level: 1
Technical Specifications
| Item | Symbol | Electrical Spec. | Unit | Condition |
|---|---|---|---|---|
| Electrical Specifications | FL | 12.288000 | MHz | |
| f/F | -50 ~ +50 | ppm | @3.30.3V / -40~85 | |
| Topr | -40 ~ +85 | |||
| Vdd | 3.0 ~ 3.6 | V | ||
| CL | 15 | pF | C-MOS (Idd1, Idd2 test at No Load) | |
| Idd1 | - ~ 10 | mA | @3.3V / 253 (#1 pin: open or "H") | |
| Idd2 | - ~ 0.01 | mA | (#1 pin: "L" level) | |
| Vol | - ~ 0.1xVdd | V | ||
| Voh | 0.9xVdd ~ - | V | ||
| Duty | 40 ~ 60 | % | ||
| Tr & Tf | - ~ 7 | ns | ||
| Iil | - ~ 10 | uA | ||
| Iih | - ~ 10 | uA | ||
| Vil | - ~ Vddx0.3 | V | ||
| Vih | Vddx0.7 ~ - | V | ||
| Tplz | - ~ 150 | nsec | ||
| Tpzl | - ~ 10 | msec | ||
| Aging | -3 ~ +3 | ppm/year | ||
| Start-up time | - ~ 10 | ms | ||
| Jitter, Phase RMS(1-) | - ~ 1 | ps | 12KHz~20MHz Frequency Band | |
| Absolute Maximum Ratings | Vdd | -0.5 ~ 4.0 | V | Vdd terminal voltage |
| Vcont | -0.5 ~ Vdd+0.5 | V | Input terminal voltage | |
| Vout | -0.5 ~ Vdd+0.5 | V | Output terminal voltage | |
| Iout | 15 | mA | Output terminal current | |
| Tstr | -55 ~ 125 | deg.C | Storage temp. range |
Dimensions: 3.20.2mm (Length) x 2.50.2mm (Width)
Standard Packing Quantity: 3,000 PCS / REEL
Reel Dimensions: 180+0/-3mm (Reel Diameter), 60.50.5mm (Reel Width)
Carrier Tape Dimensions: 13.20.5mm (Width), 4.00.1mm (Pitch)
Release Strength of Cover Tape: 0.1N to 0.7N (Pulling direction: 165 to 180, Speed: 300mm/min)
Mechanical Performance:
- Shock: Dropping from 50 cm height 3 times on 30mm hard wooden board. (JIS C 60068-2-32)
- Vibration: Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. (JIS C 60068-2-6)
- Leakage Test: Leak Rate Max. 1.0x10^-9 Pa-m3/sec. (Measured by Helium leak detector)
- Solder ability: After applying ROSIN Flux, dipping in solder bath at 245C +/- 5C for 3+/-0.5 sec. (JIS C 60068-2-20)
Environmental Performance:
- Resistance of Soldering Heat: Performed as per reflow conditions.
- Humidity: 60C +/-2C, RH 90~95%, Duration of 240 hours. (JIS C 60068-2-3)
- Storage in Low Temperature: -55C +/-2C, Duration of 240 hours. (JIS C 60068-2-1)
- Storage in High Temperature: +125C +/-2C, Duration of 240 hours. (JIS C 60068-2-2)
- Temperature cycles: -55C +/-2C (30min) +125C +/-2C (30min), 25 cycles. (JIS C 0025)
Specifications Code A: Frequency variation shall be within +/-5ppm
Specifications Code B: More than 90% of lead shall be covered by new solder.
2410121457_HELE-HSO321S-12-288MHZ-3-3V--40--85-_C160458.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
