<
>
Specifications
Frequency:
13.56MHz
Mfr. Part #:
83013560301
Package:
SMD3225-4P
Key Attributes
Model Number:
83013560301
Product Description
Product Overview
This specification applies to the RoHS crystal oscillator with a frequency of 13.560MHz, designed for use in electronic equipment. It features a SMD3.2x2.5 package and offers a frequency stability of 30ppm.
Product Attributes
- Brand: JIANGSU HD-CRYSTAL TECHNOLOGY CO.,LTD
- Origin: Jiangsu Province, China
- Certifications: RoHS
Technical Specifications
| Part Number | Nominal Frequency | Frequency Stability | Aging | Operating Temperature Range | Storage Temperature Range | Input Voltage (VDD) | Input Current (IDD) | Output Waveform | Output Symmetry | Rise/Fall Time | Output Voltage VOL | Output Voltage VOH | Output Load | Output State Control | Start-up Time | Standby Current | Phase Jitter (rms) | Oscillation Mode | Package |
| CXO3225/13.560M/3.3V/30PPM | 13.560MHz (incl. 25C tolerance, tolerance over operating temperature range, input voltage change, load change, 1 year aging) | 30ppm | 3ppm/year | -40 to +85C | -55 to +125C | +3.3Vdc10% | 20mA max | CMOS | 5010% | 8ns max | 10%VDD | 90%VDD | 15pF | Enable/disable | 510ms max | 10A max | 1ps rms max (12kHz to 20MHz) | Fundmental | SMD3.2x2.5 |
Reliability Specification
| Item | Condition | Standard | Frequency Change |
| Drop characteristics | Free drop from 75cm height on a hard wooden board for 3 times. (Board is thickness more than 30 mm.) | Rr as specification | 5ppm |
| Mechanical shock | Device are shocked to half sine wave (1000g) three mutually perpendicular axes each 3 times | Rr as specification | 5ppm |
| Shake characteristics | Shake frequency 10~55Hz, cyc1~2 minutes, swing 1.5mm, direction x/y/z, all 30 minutes, test after 1 hours. | Rr as specification | 5ppm |
| Humidity characteristics | +402 & 90%~95% R.H. 250 hours | Rr as specification | 5ppm |
| Low temperature characteristics | -402, 250 hours, put in room temperature, test after 1 hours. | Rr as specification | 5ppm |
| High temperature characteristics | +852, 250 hours, put in room temperature, test after 1 hours. | Rr as specification | 5ppm |
| Temperature cycling | -402/303 min~+852/303min, 5 cycles | Rr as specification | 5ppm |
| Refluence examination | Rr as specification | 5ppm |
Notes
To ensure optimal oscillator performance, place a by-pass capacitor of 0.1uF as close to the part as possible between Vdd and GND pads.
2411121117_HD-83013560301_C5272978.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
