Product Overview

This document specifies the requirements for the HANYONES ELECTRONICS CO.,LTD NR6045 series power inductors. These inductors are designed for various electronic applications and are manufactured with high-quality materials to ensure reliable performance.

Product Attributes

• Brand: HANYONES
• Origin: Dongguan, China
• Certifications: UL File No. E258243 (for Wire)

Technical Specifications

Dimensions and Recommend PC Board Pattern

Material List

Storage Conditions/Matters Need Attention

• Storage Temperature and Humidity Conditions:
  • Product packing with Carrier tape: -10~+40 and less than 60% RH
  • Product alone: -20~+60 and less than 60% RH
• Products should be used within 6 months. (Note that the product should be used as soon as possible once it is opened)
• The packaging material should be kept where no chlorine or sulfur exists in the air.
• Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder ability.
• The use of tweezers or vacuum pick-ups is strongly recommended for individual components. Bulk handling should ensure that abrasion and mechanical shock are minimized.

Packaging Information

Tape Packing Diagram

(Diagrams not provided in text, refer to original document if available)

Peeling Required

• Force: 20~100g
• Peeling Angle: 165~180

Packing Quantity

Soldering and Mounting

Recommended Reflow Conditions (Lead-free)

The above recommended reflow test conditions are based on the company's reflow welding equipment. The reflow test profile may vary with the testing instruments.

Reflow Soldering Heat Endurance

• Reflow soldering is carried out under the recommended conditions. After placing under normal temperature and humidity conditions for 2 hours, no mechanical or electrical characteristic defects should occur.
• Twice reflow test is acceptable with the test interval remaining 1 hour under the normal conditions.