Online Service

Online Service

Contact Person
+86 136 6733 2386
quality miniature aluminum electrolytic capacitors Guangdong TOPAZ Elec Tech ERE1C471M081200B with RoHS REACH certifications factory
<
quality miniature aluminum electrolytic capacitors Guangdong TOPAZ Elec Tech ERE1C471M081200B with RoHS REACH certifications factory
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
470uF
Height - Seated (Max):
12mm
Voltage Rating:
16V
Diameter:
8mm
Tolerance:
±20%
Mfr. Part #:
ERE1C471M081200B
Package:
Through Hole,D8xL12mm
Key Attributes
Model Number: ERE1C471M081200B
Product Description

Product Overview

This specification covers all series of miniature single-ended aluminum electrolytic capacitors from Guangdong TOPAZCON Electronic Technology Co.,LTD. These capacitors are designed for reliable long-term operation within a specified ambient temperature range when subjected to rated working voltage. The product adheres to RoHS, REACH, and HF standards.

Product Attributes

  • Brand: TOPAZCON
  • Origin: Guangdong, China
  • Material: Aluminum Electrolytic
  • Certifications: RoHS, REACH, HF

Technical Specifications

ItemTest ConditionsPerformance Requirements
Surge VoltageAt 15~35, applying Surge Voltage 1000 cycles of 30s on and 330s offNo visible damage; C/C 10 %; tg initial specified value; I initial specified value
Load LifeAt rated temperature, applying rated voltage (DC voltage value + AC voltage peak nominal voltage) for specified time, recovered after 16 hours:C/C within 20 % of initial measured value; tg 200% initial specified value; I initial specified value
Shelf Life1000 hours at +105. After test: UR to be applied for 30min >24h before measurement.C/C within 20 % of initial measured value; tg 200% initial specified value; I 200% initial specified value
SolderabilityTank temperature 2355; Impregnating depth:90% of the total dipped portion of termination; Impregnating depth:2s.The lead wire is coated by tin and wet. At least 90% of Circumferential surface of the lead wire;
Resistance to soldering heatTank temperature:2605; Impregnating depth:6mm; Impregnating time:10s.No visible damage; C/C 10 %; tg initial specified value; I initial specified value
Stable Humidity21 days at 40, RH 90 to 95%, no voltage applied.No visible damage; no leakage of electrolyte; marking legible; C/C 5 %; tg initial specified value; I initial specified value
Resistance to vibrationFrequency :From 10 to 55 Hz and return to 10 Hz, shall be transferred in 1 Min Total Amplitude: 1.5 mm Direction and duration of vibration :3 orthogonal directions mutually each for 2 hours Total 6 hours.No visible damage; no leakage of electrolyte; marking legible; C/C 5 %
Characteristic at High and low temperatureStep 1: Measured impedance. Step 2: After the capacitor being stored for 2 hours, impedance shall be Measured. The measurement shall be made at thermal stability. Step 4: After the capacitor being stored for 2 hours, Leakage Current shall be Measured. The measurement shall be made at thermal stability.Step 2 Impedance ratio (to Step 1) 5; Step 4 Leakage Current 10 times specified value
Resisting SolventSolvent :Isopropylalcohol Temperature: 20-25 Time : 305sAppearance :No remarkable abnormality
Terminal StrengthTensile strength of terminal: A static load shall be applied to the terminal in the axial direction for 101 sec.When the capacitance is measured ,there shall be no intermittent contacts or open or short circuiting . There shall be no such mechanical damage etc. as terminal damage
Terminal Bending StrengthHang the specified dead weight, then bend the body through 90, return to the original position. Next bend it in opposite direction through 90 with the same speed, again return to the original position. Complete this operation in about 5 sec.When the capacitance is measured ,there shall be no intermittent contacts or open or short circuiting . There shall be no such mechanical damage etc. as terminal damage
Reversed polarity D.C. testD.C. rated voltage shall be applied to the capacitor.
Pressure reliefThe pressure relief device shall open in such a way as to avoid any danger of fire or explosion of Capacitor elements.No fire, no explosion or separation of aluminum case and sealing material.

2410121646_Guangdong-TOPAZ-Elec-Tech-ERE1C471M081200B_C7545739.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max