<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
2.2uF
Height - Seated (Max):
9mm
Voltage Rating:
50V
Diameter:
5mm
Tolerance:
±20%
Mfr. Part #:
ELJ1H2R2M050900Y
Package:
Through Hole,D5xL9mm
Key Attributes
Model Number:
ELJ1H2R2M050900Y
Product Description
Product Overview
This specification covers "ALL series" miniature single-ended aluminum electrolytic capacitors, designed for reliable long-term operation within a specified ambient temperature range. These capacitors reference JIS-C-5101-1 and JIS-C-5101-4 standards.
Product Attributes
- Brand: TOPAZCON
- Origin: Guangdong, China
- Certifications: RoHS, REACH, HF
Technical Specifications
| Item | Test Conditions | Performance Requirements |
| Surge Voltage | At 15~35, applying Surge Voltage 1000 cycles of 30s on and 330s off. | No visible damage; C/C 10%; tg initial specified value; I initial specified value |
| Load Life | At rated temperature, applying rated voltage (DC value + AC voltage peak nominal voltage) specified times, recover 16 hours after: | C/C Within 20% of initial value; tg 200% initial specified value; I initial specified value |
| Shelf Life | 105, 1000 hours. After test: UR to be applied for 30min >24h before measurement. | C/C Within 20% of initial value; tg 200% initial specified value; I 200% initial specified value |
| Solderability | Tank temperature: 2355; Impregnating depth: 90% of the total dipped portion of termination; Impregnating depth: 2s. | The lead wire is coated by tin and wet. At least 90% of Circumferential surface of the lead wire; |
| Resistance to soldering heat | Tank temperature: 2605; Impregnating depth: 6mm; Impregnating time: 10s. | No visible damage; C/C 10%; tg initial specified value; I initial specified value |
| Stable Humidity | 21 days at 40, RH 90 to 95%, no voltage applied. | No visible damage; no leakage of electrolyte; marking legible; C/C 5%; tg initial specified value; I initial specified value |
| Resistance to vibration | Frequency: 10-55-10 Hz/min Total Amplitude: 1.5 mm Direction and duration of vibration: 3 orthogonal directions mutually each for 2 hours Total 6 hours. | No visible damage; no leakage of electrolyte; marking legible; C/C 5%; |
| Characteristic at High and low temperature | Step 1: Measured impedance. Step 2: After the capacitor being stored for 2 hours, impedance shall be Measured. Step 4: After the capacitor being stored for 2 hours, Leakage Current shall be Measured. | Step 2 Impedance ratio (to Step 1) 5; Step 4 Leakage Current 10 times specified value |
| Resisting Solvent | Solvent: Isopropylalcohol; Temperature: 20-25; Time: 305s | Appearance: No remarkable abnormality |
| Terminal Strength | Tensile strength: A static load (stated in the table above) shall be applied to the terminal in the axial direction for 101 sec. | When the capacitance is measured, there shall be no intermittent contacts or open or short circuiting. There shall be no such mechanical damage etc. as terminal damage. |
| Terminal Bending Strength | Hang the specified dead weight (stated in the table above), then bend the body through 90, return to the original position. Next bend it in opposite direction through 90 with the same speed, again return to the original position. Complete this operation in about 5 sec. | |
| Reversed polarity D.C. test | D.C. rated voltage shall be applied to the capacitor. | |
| Pressure relief | The pressure relief device shall open in such a way as to avoid any danger of fire or explosion of Capacitor elements. |
2410121646_Guangdong-TOPAZ-Elec-Tech-ELJ1H2R2M050900Y_C7545749.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
