<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
15uF
Height - Seated (Max):
9mm
Pin Spacing:
3.5mm
Voltage Rating:
160V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRF0809150M161P00
Package:
Through Hole,D8xL9mm
Key Attributes
Model Number:
ECRF0809150M161P00
Product Description
Product Overview
This document provides guidelines for the proper use and handling of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Following these instructions will ensure optimal performance, extended lifespan, and prevent damage to the capacitors and associated circuits.
Product Attributes
- Brand: TOPAZ
- Origin: Guangdong, China
- Manufacturer: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630, E-mail: songshengcw@163.com, Website: www.songshengdg.com
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors if polarity is uncertain. Not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse circuits and polarity reverse circuits. Not applicable for pure AC or high ripple current circuits. |
| Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow excessive ripple current, which can cause heating, capacitance reduction, and damage. Ripple current should not exceed 80% of the rated value. |
| Charge/Discharge Cycles | For circuits with rapid charge/discharge cycles, use specially designed capacitors to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature & Life Relationship | Capacitor life is related to operating temperature. A 10C reduction in temperature can double the lifespan at rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Storage | For capacitors stored for a long time, leakage current may increase and withstand voltage may decrease. Before use, gradually apply DC voltage up to the rated voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if the case needs to be insulated from the circuit. |
| Force on Terminals/Leads | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| Lead Bending | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to avoid internal structural damage. |
| Circuit Board Cleaning | Use recommended solvents (Methanol, Isopropanol, Ethanol, etc.) for cleaning circuit boards. Avoid halogenated solvents (trichlorethylene, xylene, acetone) to protect the capacitor body. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. For dip soldering, recommended temperature is within 260C for no more than 10 seconds to prevent damage. |
| Hole Layout | On circuit boards, hole spacing should match lead spacing. Incorrect spacing can cause stress on leads, leading to shorts or circuit damage. Consider hole layout carefully to prevent solder splashing onto the capacitor body. |
1809271941_Guangdong-TOPAZ-Elec-Tech-ECRF0809150M161P00_C156986.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
