<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
7mm
Voltage Rating:
25V
Pin Spacing:
1.5mm
Diameter:
4mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
28mA@120Hz
Mfr. Part #:
ECSS0407100M025P00
Package:
Through Hole,D4xL7mm
Key Attributes
Model Number:
ECSS0407100M025P00
Product Description
Product Overview
This document provides detailed guidelines for the proper use and handling of TOPAZCON Aluminum Electrolytic Capacitors (SS Series) to ensure optimal performance and extended lifespan. It covers essential aspects such as polarity, voltage ratings, ripple current, temperature considerations, storage, and soldering techniques.
Product Attributes
- Brand: TOPAZCON
- Origin: Guangdong, China
- Part Name: E-CAP
- Series: SS Series
- Customer: Shenzhen Lichuang E-commerce Co., Ltd.
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors for uncertain polarity. Not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse circuits and polarity reverse circuits only. Not applicable in pure AC or high ripple current circuits. |
| Operating Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow ripple current to exceed permissible limits. Excessive ripple current causes heating, capacitance reduction, and damage. Generally, not more than 80% of rated current. |
| Circuit Application | For circuits with rapid charge/discharge cycles, use specially designed capacitors to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower operating temperatures ensure longer life. |
| Temperature and Life Relationship | Life is approximately doubled for every 10C reduction in temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with rising frequency, leading to higher ambient temperature. |
| Storage | For capacitors stored for a long time, leakage current may increase and withstand voltage may decrease. Before use, gradually apply DC voltage up to the rated voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. If insulation is required, implement it at the mounting point. |
| Mechanical Handling | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. Maintain a 2mm safe spacing when bending leads to a horizontal state to avoid internal structural damage. |
| Cleaning | Avoid halogenated solvents (e.g., trichlorethylene, xylene, acetone). Recommended solvents: methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, and general detergents. |
| Soldering | Keep soldering irons away from plastic sleeves. Recommended solder bath temperature is within 260C for no more than 10 seconds to prevent damage. |
| PCB Hole Layout | Ensure hole spacing on the circuit board matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor body. |
2410122013_Guangdong-TOPAZ-Elec-Tech-ECSS0407100M025P00_C156643.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
