<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
17mm
Voltage Rating:
400V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRF1017100M401P00
Package:
Through Hole,D10xL17mm
Key Attributes
Model Number:
ECRF1017100M401P00
Product Description
Product Overview
This document provides guidelines for the proper use and handling of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Following these instructions will ensure optimal performance, extended lifespan, and prevent damage to the capacitors.
Product Attributes
- Brand: TOPAZ
- Origin: Guangdong, China
- Company: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630, E-mail: songshengcw@163.com, Website: http:www.songshengdg.com
- Address: No. 3, Fufu Road, Foziao Village, Dalang Town, Dongguan City, Guangdong Province, China, Postal Code: 523781
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors for uncertain polarity. Not for AC applications. |
| Bipolar Capacitors | Suitable for pulse and polarity reverse circuits only. Not for pure AC or high ripple current circuits. |
| Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not exceed permissible ripple current. Exceeding limits causes heating, capacitance reduction, and damage. Generally not more than 80% of rated current. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid charge/discharge cycles to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| Temperature and Life | Life is inversely proportional to temperature. A 10C reduction in temperature typically doubles the lifespan at rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is usually measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Storage | For capacitors stored long-term, apply rated DC voltage gradually before use. Storage may increase leakage current and decrease withstand voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation must be applied at the mounting point if required. |
| Terminal Force | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| Lead Bending | When bending leads for horizontal mounting, maintain a 2mm safety distance from the capacitor body to avoid internal structural damage. |
| Cleaning | Use recommended solvents (Methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, detergents) for cleaning circuit boards. Avoid halogenated solvents (trichlorethylene, xylene, acetone). |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended soldering temperature is within 260C for no more than 10 seconds to prevent damage. |
| Hole Layout | Ensure circuit board hole spacing matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor sleeve. |
2410122013_Guangdong-TOPAZ-Elec-Tech-ECRF1017100M401P00_C156672.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
