<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
2.2uF
Height - Seated (Max):
12mm
Pin Spacing:
2.5mm
Voltage Rating:
200V
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
68mA@120Hz
Mfr. Part #:
ECRF06122R2M201P00
Package:
Through Hole,D6.3xL12mm
Key Attributes
Model Number:
ECRF06122R2M201P00
Product Description
Product Overview
This document provides detailed guidelines for the proper usage and handling of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Adhering to these instructions ensures optimal performance, extended lifespan, and prevents potential damage to the capacitors and associated circuits.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Manufacturer: GuangDong TOPAZ Electronic Technology Co., Ltd.
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Polarity is marked on the capacitor body. Use bipolar capacitors when polarity is not determined or unknown. DC electrolytic capacitors cannot be used for AC application. |
| Bipolar Capacitors | Used only in pulse circuits and polarity reverse circuits. Not applicable in pure AC or high ripple current circuits. |
| Voltage Application | Recommended working voltage is 70-80% of rated voltage. Do not apply voltage greater than rated voltage. |
| Ripple Current | Ripple current should not exceed allowable limits, generally not more than 80% of the rated value. Excessive ripple current causes heating, capacitance reduction, and damage. |
| Charge/Discharge Circuits | For circuits with rapid charge/discharge cycles, use specially designed capacitors to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower operating temperatures ensure longer life. |
| Temperature and Life Relationship | Life is approximately doubled for every 10C decrease in temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Storage | For capacitors stored for a long time, apply rated DC voltage gradually before use to restore capacitance and withstand voltage, as leakage current may increase. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation must be provided at the mounting point if the case requires insulation. |
| Terminal/Lead Force | Do not apply excessive force to terminals and leads to prevent breakage, separation, or internal connection failure. |
| Lead Bending | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to avoid internal structural damage. |
| Circuit Board Cleaning | Use recommended cleaning solvents like methanol, isopropanol, ethanol, etc. Avoid halogenated solvents (trichlorethylene, xylene, acetone) to protect the capacitor body. |
| Soldering | Maintain distance from the plastic sleeve. Recommended soldering temperature is within 260C for no more than 10 seconds to prevent damage. |
| Hole Layout | Ensure mounting hole spacing matches lead spacing on the circuit board to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor. |
1809271940_Guangdong-TOPAZ-Elec-Tech-ECRF06122R2M201P00_C156990.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
