<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
220uF
Height - Seated (Max):
16mm
Voltage Rating:
63V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
335mA@120Hz
Mfr. Part #:
ECRE1016221M063P00
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
ECRE1016221M063P00
Product Description
Product Overview
This document outlines the guidelines for using Aluminum Electrolytic Capacitors to ensure optimal performance and extended lifespan. It covers essential aspects such as polarity, voltage ratings, ripple current, operating temperature, frequency, storage, and handling.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Manufacturer: GuangDong TOPAZ Electronic Technology Co., Ltd.
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors when polarity is uncertain. DC electrolytic capacitors are not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse circuits and polarity reverse circuits. Not applicable for pure AC or high ripple current circuits. |
| Operating Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow ripple current to exceed permissible limits, generally not more than 80% of rated current, to prevent overheating and damage. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid charge and discharge cycles to prevent damage and premature failure. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature and Life Relationship | Life is generally doubled for every 10C reduction in operating temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, potentially raising ambient temperature. |
| Storage | For capacitors stored long-term, apply rated DC voltage gradually before use to address potential increases in leakage current and reduced withstand voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if case insulation is necessary. |
| Handling | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe distance from the capacitor body to prevent internal structural damage. |
| Cleaning | Avoid halogenated solvents (e.g., trichlorethylene, xylene, acetone) for cleaning circuit boards. Recommended solvents include methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, and general detergents. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended solder bath temperature is within 260C for no more than 10 seconds to prevent component damage. |
| Circuit Board Layout | Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRE1016221M063P00_C156777.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
