<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
15uF
Height - Seated (Max):
20mm
Voltage Rating:
400V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRF1020150M401P00
Package:
Through Hole,D10xL20mm
Key Attributes
Model Number:
ECRF1020150M401P00
Product Description
Product Overview
This document outlines the usage guidelines and technical specifications for TOPAZCON Aluminum Electrolytic Capacitors, specifically the RF Series. It provides essential information to ensure optimal performance and longevity of the capacitors when used in DC circuits. Key considerations include polarity, voltage ratings, ripple current, operating temperature, frequency response, and proper handling during storage and soldering.
Product Attributes
- Brand: TOPAZCON
- Origin: GuangDong, China
- Manufacturer: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Series: RF Series
Technical Specifications
| Item | Description |
|---|---|
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors if polarity is uncertain. Not suitable for AC applications. |
| Bipolar Capacitors Usage | Suitable for pulse circuits and polarity reverse circuits only. Not applicable for pure AC or high ripple current circuits. |
| Working Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow excessive ripple current. Exceeding permissible limits can cause heating, capacitance reduction, and damage. Ripple current should generally not exceed 80% of the rated value. |
| Charge/Discharge Circuits | For circuits with rapid charge/discharge cycles, use specially designed capacitors to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature and Life Relationship | Life is approximately doubled for every 10 decrease in operating temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Long-Term Storage Handling | For capacitors stored for extended periods, gradually apply rated DC voltage before use to address potential increases in leakage current and reduced withstand voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if case insulation is necessary. |
| Terminal/Lead Force | Avoid applying excessive force to terminals and leads to prevent breakage, separation, or internal connection failure. |
| Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to prevent internal structural damage. |
| Cleaning After Soldering | Use recommended solvents like methanol, isopropanol, ethanol, etc. Avoid halogenated solvents (trichloroethylene, xylene, acetone) to protect the capacitor body. |
| Soldering Temperature and Duration | Maintain a distance between the soldering iron and the plastic sleeve. Recommended soldering temperature is within 260 for no more than 10 seconds. |
| PCB Hole Layout | Ensure mounting hole spacing on PCBs matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRF1020150M401P00_C156728.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
