<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
2200uF
Height - Seated (Max):
20mm
Voltage Rating:
16V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRE1020222M016V00
Package:
Through Hole,D10xL20mm
Key Attributes
Model Number:
ECRE1020222M016V00
Product Description
Aluminum Electrolytic Capacitor Guidelines
This document provides essential guidelines for the optimal performance and extended lifespan of Aluminum Electrolytic Capacitors. Please read these instructions carefully before use.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Manufacturer: GuangDong TOPAZ Electronic Technology Co., Ltd.
Technical Specifications
| Item | Description |
|---|---|
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors for uncertain polarity. Not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse and polarity reverse circuits only. Not applicable for pure AC or high ripple current circuits. |
| Operating Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow ripple current to exceed permissible limits (generally not more than 80% of rated current) to prevent overheating, capacitance reduction, and damage. |
| Fast Charge/Discharge Circuits | Use specially designed capacitors for circuits with frequent charge/discharge cycles to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| Temperature and Life Relationship | Life is approximately doubled for every 10 decrease in operating temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Long-Term Storage | Capacitors stored for extended periods may experience increased leakage current and reduced withstand voltage. Treat with rated DC voltage gradually before use. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Use insulating measures at the mounting point if case insulation is required. |
| Terminal/Lead Force | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| Bending Leads (Horizontal Mount) | Maintain a 2mm safe spacing between the bend and the capacitor body to prevent internal structural damage. |
| Circuit Board Cleaning | Use recommended solvents (Methanol, Isopropanol, Ethanol, etc.). Avoid halogenated solvents (trichloroethylene, xylene, acetone) to protect sleeve, marking, and sealing materials. |
| Soldering | Keep soldering iron away from plastic sleeves. Recommended: within 260 for no more than 10 seconds in a solder bath to avoid damage. |
| Hole Layout on PCB | Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRE1020222M016V00_C156608.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
