<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
2.2uF
Height - Seated (Max):
7mm
Voltage Rating:
50V
Pin Spacing:
1.5mm
Diameter:
4mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
20mA@120Hz
Mfr. Part #:
ECSS04072R2M050P00
Package:
Through Hole,D4xL7mm
Key Attributes
Model Number:
ECSS04072R2M050P00
Product Description
Product Overview
This document outlines the specifications and usage guidelines for TOPAZCON SS Series E-CAPs (Aluminum Electrolytic Capacitors) manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. It provides crucial information for ensuring optimal performance, extending product lifespan, and preventing damage during installation and operation.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Part Name: E-CAP
- Series: SS Series
Technical Specifications
| Part Name | SPEC | Part NO. | Date |
| E-CAP | SS Series | ALL | 2018-3-3 |
Guidelines For Using Aluminum Electrolytic Capacitor
| No. | Item | Description |
| 1 | Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to avoid short circuits or damage. Use bipolar capacitors for uncertain polarity. Not suitable for AC applications. |
| 2 | Bipolar Capacitors | Suitable for pulse and polarity reverse circuits only. Not applicable for pure AC or high ripple current circuits. |
| 3 | Operating Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. Exceeding rated voltage increases leakage current and may cause damage. |
| 4 | Ripple Current | Do not allow ripple current to exceed permissible limits. Excessive ripple current causes heating, capacitance reduction, and damage. Generally, do not exceed 80% of rated current. |
| 5 | Charge/Discharge Circuits | For circuits with rapid charge/discharge cycles, use specially designed capacitors to prevent damage, capacitance decrease, and heat rise. |
| 6 | Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| 7 | Temperature and Life Relationship | Capacitor life doubles with a 10C reduction in operating temperature. Formula provided for calculation. |
| 8 | Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| 9 | Long-Term Storage | Capacitors stored for extended periods may experience increased leakage current and reduced withstand voltage. Before use, gradually apply DC voltage up to the rated voltage. |
| 10 | Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulate at the mounting point if case insulation is required. |
| 11 | Terminal/Lead Force | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| 12 | Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to avoid internal structural damage. |
| 13 | Circuit Board Cleaning | Use recommended solvents (Methanol, Isopropanol, Ethanol, etc.) for cleaning. Avoid halogen agents or solvents like trichlorethylene, xylene, or acetone to protect the capacitor body. |
| 14 | Soldering | Maintain distance from the plastic sleeve. Recommended soldering temperature is within 260C for no more than 10 seconds to prevent damage. |
| 15 | Hole Layout on PCB | Ensure hole spacing on the circuit board matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECSS04072R2M050P00_C156628.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
