<
>
Specifications
Lifetime:
5000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
11mm
Voltage Rating:
100V
Pin Spacing:
2mm
Diameter:
5mm
Tolerance:
±20%
Mfr. Part #:
ECLJ0511100M101P00
Package:
Through Hole,D5xL11mm
Key Attributes
Model Number:
ECLJ0511100M101P00
Product Description
Product Overview
This document provides guidelines for the proper usage and handling of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Following these instructions will ensure optimal performance and extend the lifespan of the capacitors.
Product Attributes
- Brand: TOPAZCON
- Origin: Guangdong, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: LJ Series
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Polarity is marked on the capacitor body. Reversed voltage may cause short circuit or damage. Use bipolar capacitors when polarity is uncertain. DC electrolytic capacitors are not suitable for AC applications. |
| Bipolar Capacitors Usage | Suitable for pulse circuits and polarity reverse circuits. Not applicable for pure AC or high ripple current circuits. |
| Voltage Application | Do not apply voltage greater than the rated voltage. Recommended working voltage is 70-80% of rated voltage to prolong life. |
| Ripple Current | Do not allow excessive ripple current. Exceeding the permissible limit can cause heating, capacitance reduction, and damage. Ripple current should generally not exceed 80% of the rated value. |
| Charge/Discharge Circuits | For circuits with rapid charge/discharge cycles, use specially designed capacitors to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| Temperature and Life Relationship | Life is related to operating temperature. Reducing temperature by 10 can double the lifespan at rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Storage and Usage | For capacitors stored for a long time, leakage current may increase and withstand voltage may decrease. Before use, gradually apply DC voltage up to the rated voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. If case insulation is required, insulation measures must be taken at the mounting point. |
| Mechanical Stress | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to avoid internal structural damage. |
| Circuit Board Cleaning | Use recommended cleaning solvents like methanol, isopropanol, ethanol, etc. Avoid halogenated solvents (trichlorethylene, xylene, acetone) to protect the capacitor body. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended solder bath temperature is within 260 for no more than 10 seconds to prevent damage. |
| Hole Layout on PCB | Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECLJ0511100M101P00_C156685.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
