<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
35V
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
150mA@120Hz
Mfr. Part #:
ECRE0611101M035P00
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
ECRE0611101M035P00
Product Description
GuangDong TOPAZ Electronic Technology Co., Ltd.
This document provides guidelines for using Aluminum Electrolytic Capacitors to ensure optimal performance and extended lifespan. It covers essential usage precautions, including polarity, voltage, ripple current, operating temperature, frequency, storage, and handling.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Company: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Address: No. 3, Fufu Road, Foziao Village, Dalang Town, Dongguan City, Guangdong Province, China
- Postal Code: 523781
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630
- Website: http:www.songshengdg.com
- Email: songshengcw@163.com
Technical Specifications
The following sections detail critical usage parameters for Aluminum Electrolytic Capacitors:
| Parameter | Description |
|---|---|
| Polarity: DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors when polarity is uncertain. DC electrolytic capacitors are not suitable for AC applications. | Bipolar Capacitors: Suitable for pulse and polarity reverse circuits, but not for pure AC or high ripple current circuits. |
| Voltage: Do not exceed the rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. Exceeding rated voltage increases leakage current and may damage the capacitor. | Ripple Current: Do not allow ripple current to exceed the permissible limit. Excessive ripple current causes heating, capacitance reduction, and damage. Generally, do not exceed 80% of the rated current. |
| Circuit Application: Use specially designed capacitors for circuits with rapid charge and discharge cycles to prevent damage, capacitance decrease, and heat rise. | Operating Temperature: Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| Temperature & Life: Life is approximately doubled for every 10 decrease in operating temperature. Formula provided for calculation: Ls = L0 * 2^((T0-Tx)/10). (Note: Full formula not rendered due to complexity and potential ambiguity in source text). | Operating Frequency: Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases, and tg increases with higher frequencies, leading to increased ambient temperature. |
| Long-Term Storage: For capacitors stored for extended periods, apply rated DC voltage gradually before use. Storage may increase leakage current and decrease withstand voltage. | Case Insulation: The capacitor case is connected to the cathode terminal via electrolyte. Insulate the case at the mounting point if line insulation is required. |
| Force on Terminals/Leads: Avoid applying excessive force to terminals and leads to prevent breakage, separation, or internal connection failure. | Lead Bending: When bending leads for horizontal mounting, maintain a 2mm safety distance from the capacitor body to prevent internal structural damage. |
| Cleaning: Do not use halogenated solvents (e.g., trichlorethylene, xylene, acetone) for cleaning. Recommended solvents include methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, and general detergents. | Soldering: Maintain distance between soldering iron and plastic sleeve. For solder bath dipping, keep temperature within 260 and duration under 10 seconds to prevent damage. |
| PCB Hole Layout: Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor sleeve. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRE0611101M035P00_C156713.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
