<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
15mm
Voltage Rating:
400V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRE1015100M401P00
Package:
Through Hole,D10xL15mm
Key Attributes
Model Number:
ECRE1015100M401P00
Product Description
Product Overview
This document provides guidelines for using Aluminum Electrolytic Capacitors to ensure optimal performance and extended lifespan. It covers essential considerations such as polarity, voltage ratings, ripple current, operating temperature, frequency, storage, and handling during soldering and circuit board cleaning.
Product Attributes
- Brand: TOPAZCON (GuangDong TOPAZ Electronic Technology Co., Ltd.)
- Origin: China
- Part Name: E-CAP
- Series: RE Series
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors when polarity is uncertain. DC electrolytic capacitors are not for AC applications. |
| Bipolar Capacitors | Suitable for pulse and polarity reverse circuits, but not for pure AC or high ripple current circuits. |
| Voltage Usage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. Exceeding rated voltage increases leakage current and may cause damage. |
| Ripple Current | Do not allow ripple current to exceed permissible limits, generally not more than 80% of rated current. Excessive ripple current causes heating, capacitance reduction, and damage. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid charge and discharge cycles to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature & Life Relationship | Life is generally doubled for every 10C reduction in operating temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Storage | For capacitors stored long-term, apply rated DC voltage gradually before use to address potential increases in leakage current and reduced withstand voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if case insulation is necessary. |
| Force on Terminals/Leads | Avoid applying excessive force to terminals and leads to prevent breakage, separation, and internal connection failure. |
| Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe distance from the capacitor body to prevent internal structural damage. |
| Cleaning | Do not use halogenated solvents (e.g., trichlorethylene, xylene, acetone) for cleaning. Recommended solvents include methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, and general detergents. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended soldering temperature is within 260C for no more than 10 seconds to avoid component damage. |
| Hole Layout | Ensure mounting hole spacing on circuit boards matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor sleeve. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRE1015100M401P00_C156751.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
