<
>
Specifications
Lifetime:
5000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
100V
Diameter:
6.3mm
Tolerance:
±20%
Mfr. Part #:
ECLJ0611100M101P00
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
ECLJ0611100M101P00
Product Description
Product Overview
This document provides guidelines for using Aluminum Electrolytic Capacitors from GuangDong TOPAZ Electronic Technology Co., Ltd. to ensure optimal performance and extended lifespan. It covers essential precautions regarding polarity, voltage, ripple current, temperature, frequency, storage, handling, soldering, and circuit board design.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Manufacturer: (GuangDong TOPAZ Electronic Technology Co., Ltd.)
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Bipolar capacitors are used for pulse circuits and polarity reverse circuits, not for pure AC or high ripple current. |
| Voltage Usage | Do not apply voltage greater than rated voltage. Recommended working voltage is 70-80% of rated voltage. |
| Ripple Current | Do not allow excessive ripple current; generally not more than 80% of the rated current. |
| Circuit Application | Use specially designed capacitors for circuits with rapid charge and discharge cycles. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| Temperature & Life Relationship | Life doubles for every 10C reduction in temperature from the rated temperature. Formula provided for calculation. |
| Frequency | Capacitance decreases and tg increases with rising frequency. Measurements are typically at 100Hz or 120Hz. |
| Storage | Capacitors stored for a long time may have increased leakage current and reduced withstand voltage. Apply rated DC voltage treatment before use. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation measures are required if the case needs to be insulated. |
| Handling | Do not apply excessive force to terminals and leads. Maintain a 2mm safe spacing when bending leads for horizontal mounting. |
| Cleaning | Use recommended solvents like methanol, isopropanol, ethanol, etc. Do not use halogenated solvents. |
| Soldering | Maintain distance from plastic sleeves. Recommended temperature within 260 and duration not exceeding 10 seconds. |
| Circuit Board Design | Ensure hole spacing matches lead spacing to avoid stress. Consider hole layout to prevent solder splashing. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECLJ0611100M101P00_C156972.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
