<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
6.8uF
Height - Seated (Max):
13mm
Voltage Rating:
400V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRE10136R8M401P00
Package:
Through Hole,D10xL13mm
Key Attributes
Model Number:
ECRE10136R8M401P00
Product Description
Product Overview
This document provides guidelines for the proper use and handling of GuangDong TOPAZ Electronic Technology Co., Ltd. aluminum electrolytic capacitors. Adhering to these instructions will ensure optimal performance and extend the lifespan of the capacitors. Key considerations include polarity, voltage ratings, ripple current, operating temperature, frequency, storage, and soldering procedures.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Company: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Address: No. 3, Fufu Road, Foziao Village, Dalang Town, Dongguan City, Guangdong Province, China
- Postal Code: 523781
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630
- Website: http:www.songshengdg.com
- Email: songshengcw@163.com
Technical Specifications
| Item | Description |
|---|---|
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to avoid short circuits or damage. Use bipolar capacitors when polarity is uncertain. Not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse circuits and polarity reverse circuits. Not applicable for pure AC or high ripple current circuits. |
| Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow excessive ripple current. Ripple current exceeding permissible limits can cause heating, capacitance reduction, and damage. Generally, do not exceed 80% of rated current. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid charge and discharge cycles to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature and Life Relationship | Life is approximately doubled for every 10 reduction in operating temperature from the maximum rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Long-Term Storage | Capacitors stored for extended periods may experience increased leakage current and reduced withstand voltage. Before use, gradually apply DC voltage up to the rated voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. If case insulation is required, implement insulation measures at the mounting point. |
| Terminal/Lead Force | Do not apply excessive force to terminals and leads to prevent breakage, separation, or internal connection failure. |
| Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe distance from the capacitor body to prevent internal structural damage. |
| Circuit Board Cleaning | Avoid using halogenated solvents (e.g., trichlorethylene, xylene, acetone) for cleaning. Recommended solvents include methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, and general detergents. |
| Soldering | Maintain a distance between the soldering iron and the plastic insulating sleeve. For solder dipping, recommended temperature is within 260 for no more than 10 seconds to prevent damage. |
| Hole Layout on PCB | Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor sleeve. |
2410122013_Guangdong-TOPAZ-Elec-Tech-ECRE10136R8M401P00_C156767.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
