<
>
Specifications
Mfr. Part #:
GCNR5040-1R0NC
Package:
2020
Key Attributes
Model Number:
GCNR5040-1R0NC
Product Description
Product Overview
The GCNR5040 GLE is a high-performance inductor designed for various electronic applications. It offers reliable performance with specifications for inductance, DC resistance, saturation current, and temperature rise current. This product adheres to RoHS and HF regulations, ensuring compliance with environmental standards.
Product Attributes
- Brand: Shenzhen Glorious Electronic Co.,Ltd.
- Origin: China (Magnetic powder, Magnetic epoxy resin, Electrode), Germany (Wire)
- Certifications: RoHS Comp.
- Color: Black printing
Technical Specifications
| Type | Part NO. | Inductance (Lo) (uH) | Test Frequency (Hz/v) | DC Resistance (m) 30% | Saturation Current Isat (A) Max. (L/L-35%) | Temperature Rise Current Irms (A) Max. (T40) | Inductance Tolerance |
| GCNR5040 | GCNR5040-1R0M | 1.0 | 100KHz/1v | 12 | 7.35 | 4.90 | M (20%) |
| GCNR5040 | GCNR5040-1R5M | 1.5 | 100KHz/1v | 15 | 6.30 | 4.30 | M (20%) |
| GCNR5040 | GCNR5040-2R2M | 2.2 | 100KHz/1v | 19 | 4.90 | 3.80 | M (20%) |
| GCNR5040 | GCNR5040-3R3M | 3.3 | 100KHz/1v | 24 | 3.95 | 3.40 | M (20%) |
| GCNR5040 | GCNR5040-4R7M | 4.7 | 100KHz/1v | 30 | 3.50 | 3.00 | M (20%) |
| GCNR5040 | GCNR5040-6R8M | 6.8 | 100KHz/1v | 43 | 2.75 | 2.50 | M (20%) |
| GCNR5040 | GCNR5040-100M | 10 | 100KHz/1v | 64 | 2.35 | 2.10 | M (20%) |
| GCNR5040 | GCNR5040-150M | 15 | 100KHz/1v | 86 | 2.00 | 1.95 | M (20%) |
| GCNR5040 | GCNR5040-220M | 22 | 100KHz/1v | 129 | 1.60 | 1.50 | M (20%) |
| GCNR5040 | GCNR5040-330M | 33 | 100KHz/1v | 188 | 1.30 | 1.20 | M (20%) |
| GCNR5040 | GCNR5040-470M | 47 | 100KHz/1v | 272 | 1.10 | 1.00 | M (20%) |
| GCNR5040 | GCNR5040-680M | 68 | 100KHz/1v | 400 | 0.90 | 0.80 | M (20%) |
| GCNR5040 | GCNR5040-101M | 100 | 100KHz/1v | 560 | 0.75 | 0.70 | M (20%) |
| Item | Specification | Condition |
| Terminal Strength | No electrode detachment should be found | When the device is pushed in two directions of X and Z with the force of 5N for 102seconds after soldering between copper plate and the electrodes |
| Reflow test | Change from an initial value L : within20% | Peak temp 2405 3010s. The specimen shall be subjected to the reflow process under the above condition 2 times. Test board shall be 0.8mm thick. Base material shall be glass epoxy resin. Measurement shall be made after storing at standard atmospheric conditions for 1 h. |
| Vibration | Change from an initial value L : within20% | The specimen shall be subjected to a vibration of 1.5mm amplitude, sweep frequency 10~55~10Hz after vibration for 1 hours. |
| Free fall test | Change from an initial value L : within20% | The specimen must be fixed on test board. Then it shall be fallen freely from 1m height. 10 consecutive times. |
| High temperature and high humidity test | Change from an initial value L : within20% | The specimen shall be stored at a temperature of 402 with relative humidity of 90 ~ 95% for 96 4h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| High temperature preservation test | Change from an initial value L : within20% | The specimen shall be stored at a temperature of 1252 for 96 1h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Low temperature preservation test | Change from an initial value L : within20% | After stored at a temperature of -40 3 for 96 1h. The specimen should be measured, then it should be measured under normal temperature and humidity in 1h~ 2h hours. |
| Solder ability test | 95 . | Terminals shall be immersed in flux at room temperature. Dip sample into solder bath containing molten solder at 2605 for 30.5 seconds. |
| Cold and hot cycle test | Change from an initial value L : within20% | The specimen shall be measured after 20 continuous cycles of temperature change of -403 for 30 min and 1252 for 30 min with the transit period of 2min or less. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Storage temperature and humidity range | temperature range 535 humidity range 25%80% | In packing state. |
2410121507_GLE-GCNR5040-1R0NC_C439369.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
