<
>
Specifications
Current - Saturation (Isat):
1.9A
Mfr. Part #:
GCNR6045-220MC
Package:
SMD,6x6mm
Key Attributes
Model Number:
GCNR6045-220MC
Product Description
Product Overview
The GCNR6045 GLE is a magnetic component designed for various electronic applications. It is manufactured by Shenzhen Glorious Electronic Co.,Ltd. and adheres to RoHS compliance.
Product Attributes
- Brand: GLE
- Origin: China
- Materials: Nickel zinc ferrite magnetic powder, Polyurethane-system coated copper wire, Magnetic epoxy resin, Tin
- Certifications: RoHS Comp.
- Color: Black (printing)
Technical Specifications
| Type | Part NO. | Customer's Part No. | Inductance Lo (uH) | Test Frequency (Hz/v) | DC Resistance (m) 30% | Saturation Current Isat (A) Max. (L/L-35%) | Warming Current Irms (A) Max. (T40) | Inductance Tolerance |
| GCNR6045 GLE | GCNR6045 | GLE | 2.2 | 100KHz/1v | 21 | 6.00 | 4.00 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 3.3 | 100KHz/1v | 23 | 5.20 | 3.00 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 4.7 | 100KHz/1v | 25 | 4.00 | 3.00 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 6.8 | 100KHz/1v | 40 | 3.80 | 3.00 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 10 | 100KHz/1v | 47 | 3.00 | 2.50 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 15 | 100KHz/1v | 77 | 2.30 | 2.00 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 22 | 100KHz/1v | 115 | 1.90 | 1.80 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 33 | 100KHz/1v | 145 | 1.50 | 1.45 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 47 | 100KHz/1v | 220 | 1.30 | 1.25 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 68 | 100KHz/1v | 330 | 1.00 | 0.90 | M (20%) |
| GCNR6045 GLE | GCNR6045 | GLE | 100 | 100KHz/1v | 500 | 0.80 | 0.70 | M (20%) |
General Specifications
| Item | Specification | Condition |
| Terminal Strength | No electrode detachment should be found | When the device is pushed in two directions of X and Z with the force of 5N for 102seconds after soldering between copper plate and the electrodes |
| Reflow test | Change from an initial value L : within20% | Peak temp 2405 3010s. The specimen shall be subjected to the reflow process under the above condition 2 times. Test board shall be 0.8mm thick. Base material shall be glass epoxy resin. Measurement: The specimen shall be stored at standard atmospheric conditions for 1 h in prior to the measurement. |
| Vibration | Change from an initial value L : within20% | The specimen shall be subjected to a vibration of 1.5mm amplitude, sweep frequency 10~55~10Hz after vibration for 1 hours |
| Free fall test | Change from an initial value L : within20% | The specimen must be fixed on test board. Then it shall be fallen freely from 1m height. 10 consecutive times. |
| High temperature and high humidity test | Change from an initial value L : within20% | The specimen shall be stored at a temperature of 402 with relative humidity of 90 ~ 95% for 96 4h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| High temperature preservation test | Change from an initial value L : within20% | The specimen shall be stored at a temperature of 1252for 96 1h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Low temperature preservation test | Change from an initial value L : within20% | After stored at a temperature of -40 3 for 96 1h. The specimen should be measured, then it should be measured under normal temperature and humidity in 1h~ 2h hours. |
| Solder ability test | 95 | Terminals shall be immersed in flux at room temperature. Dip sample into solder bath containing molten solder at 2605 for 30.5 seconds. |
| Cold and hot cycle test | Change from an initial value L : within20% | The specimen shall be measured after 20 continuous cycles of temperature change of -403 for 30 min and 1252 for 30 min with the transit period of 2min or less. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Storage temperature and humidity range | temperature range 535 humidity range 25%80% | In packing state. |
| Standard atmospheric conditions | Ambient temperature : 5to 35, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa | If more strict measurement is required, measurement shall be made within following limits; Ambient temperature : 202, Relative humidity: 655%, Air pressure: 86kPa to 106kPa |
Physical Dimensions
| A | B | C | D | E | F |
| 6.00.3 | 6.00.3 | 4.5+0.2/-0.3 | 4.90.2 | 1.550.2 | 2.90.3 |
Recommended PCB Pattern
(Diagram not provided in text, refer to original datasheet for visual representation)
Packing Specifications
| Dimension | Value (mm) |
| Tape Dimensions A | 16.0 |
| Tape Dimensions B | 7.50 |
| Tape Dimensions C | 1.75 |
| Tape Dimensions D | 12.0 |
| Tape Dimensions E | 4.00 |
| Tape Dimensions F | 2.00 |
| Tape Dimensions G | 1.50 |
| Tape Dimensions H | 0.40 |
| Reel Dimensions A | 330.0 |
| Reel Dimensions B | 13.0 |
| Reel Dimensions C | 21.0 |
| Reel Dimensions D | 20.4 |
| Reel Dimensions E | 100 |
| Reel Dimensions F | 16.4 |
| Quantity per reel | 1000PCS |
| Quantity per packing box | 3 reels |
| Packing case material | Kraft paper |
Prohibited Substances
The company guarantees that its products and production processes comply with RoHS and HF regulations. Materials used are registered under the Regulation of Manufacture of Chemical Substances. Prohibited substances include Lead and its compounds, Mercury and its compounds, Cadmium and its compounds, Hexavalent chromium compounds, PBB, PBDE, CFCs, Halon, Carbon tetrachloride, and Trichloroethane (Methyl chloroform).
2410121507_GLE-GCNR6045-220MC_C439380.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
