<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
25V
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
130mA@120Hz
Mfr. Part #:
ECRE0611101M025P00
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
ECRE0611101M025P00
Product Description
GuangDong TOPAZ Electronic Technology Co., Ltd. - Aluminum Electrolytic Capacitor Usage Guidelines
This document provides essential guidelines for the optimal performance and extended lifespan of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Please read these instructions carefully before using the capacitors.
Product Attributes
- Brand: TOPAZCON
- Origin: Guangdong, China
- Company: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630, E-mail: songshengcw@163.com, Website: www.songshengdg.com
- Address: No. 3 Fufu Road, Foziao Village, Dalang Town, Dongguan City, Guangdong Province, China, Postal Code: 523781
Technical Specifications
| Item | Description |
|---|---|
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors for uncertain polarity. Not for AC applications. |
| Bipolar Capacitors Usage | Suitable for pulse and polarity reverse circuits only. Not for pure AC or high ripple current circuits. |
| Operating Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not exceed permissible ripple current. Excessive ripple current causes heating, capacitance reduction, and damage. Generally, do not exceed 80% of rated current. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid, repeated charge and discharge cycles to prevent damage and premature failure. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower operating temperatures ensure longer life. |
| Temperature vs. Life | Life is approximately doubled for every 10C reduction in temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Long-Term Storage | Capacitors stored for extended periods may have increased leakage current and reduced withstand voltage. Before use, gradually apply DC voltage up to the rated voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulate the case at the mounting point if required. |
| Terminal/Lead Force | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. |
| Bending Leads | Maintain a 2mm safe spacing between the capacitor body and the bend when forming leads for horizontal mounting to prevent internal structural damage. |
| Circuit Board Cleaning | Use recommended solvents (Methanol, Isopropanol, Ethanol, etc.). Avoid halogenated solvents (trichlorethylene, xylene, acetone) to protect the capacitor body, marking, and sealing materials. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. For solder dipping, keep temperature within 260C and duration under 10 seconds to prevent damage. |
| Hole Layout on PCB | Ensure hole spacing on the circuit board matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRE0611101M025P00_C156892.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
