<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
14mm
Voltage Rating:
400V
Pin Spacing:
5mm
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRF1014100M401P00
Package:
Through Hole,D10xL14mm
Key Attributes
Model Number:
ECRF1014100M401P00
Product Description
Product Overview
This document outlines the guidelines for using Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. It details essential precautions and best practices to ensure optimal performance, extend product lifespan, and prevent damage. Key considerations include polarity, voltage ratings, ripple current, operating temperature, frequency, storage, and handling during installation and soldering.
Product Attributes
- Brand: TOPAZ
- Origin: China
- Manufacturer: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630, E-mail: songshengcw@163.com, Website: www.songshengdg.com
- Address: No. 3, Fufu Road, Foziao Village, Dalang Town, Dongguan City, Guangdong Province, China, Postal Code: 523781
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to avoid short circuits or damage. Use bipolar capacitors for uncertain polarity. Not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse circuits and polarity reverse circuits. Not applicable in pure AC or high ripple current circuits. |
| Voltage Application | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow excessive ripple current. Exceeding permissible limits can cause heating, capacitance reduction, and damage. Generally, do not exceed 80% of the rated value. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid charge and discharge cycles to prevent damage and premature failure. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature & Life Relationship | Life is inversely proportional to temperature. A 10C reduction in temperature can double the lifespan compared to rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, potentially increasing ambient temperature. |
| Long-Term Storage | Capacitors stored for extended periods may exhibit increased leakage current and reduced withstand voltage. Before use, apply rated DC voltage gradually. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulate at the mounting point if case insulation is required. |
| Terminal/Lead Force | Avoid applying excessive force to terminals and leads to prevent breakage, separation, or internal connection failure. |
| Lead Bending | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to prevent internal structural damage. |
| Circuit Board Cleaning | Use recommended solvents (Methanol, Isopropanol, Ethanol, etc.) for cleaning. Avoid halogenated solvents (trichlorethylene, xylene, acetone) to protect sleeve, marking, and sealing materials. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended solder bath temperature is within 260C for no more than 10 seconds to prevent damage. |
| Hole Layout on PCB | Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRF1014100M401P00_C156955.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
