<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
9mm
Pin Spacing:
3.5mm
Voltage Rating:
200V
Diameter:
8mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRF0809100M201P00
Package:
Through Hole,D8xL9mm
Key Attributes
Model Number:
ECRF0809100M201P00
Product Description
Product Overview: This document provides detailed guidelines for the proper usage and handling of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Adhering to these instructions will ensure optimal capacitor performance, extended lifespan, and prevent potential damage or circuit malfunctions.
Product Attributes
- Brand: TOPAZCON
- Origin: China
- Company: GuangDong TOPAZ Electronic Technology Co., Ltd.
- Address: No. 3, Fufu Road, Foziao Village, Dalang Town, Dongguan City, Guangdong Province, China
- Postal Code: 523781
- Contact: TEL: 86-769-85391636 / 85391626, FAX: 86-769-85325630
- Website: http://www.songshengdg.com
- Email: songshengcw@163.com
Technical Specifications
| Item | Description | Key Considerations |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors if polarity is uncertain. Not for AC application. | Ensure correct polarity marking. Use bipolar for uncertain polarity. |
| Bipolar Capacitors | Suitable for pulse and polarity reverse circuits. Not for pure AC or high ripple current circuits. | Limited application scope. |
| Operating Voltage | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. | Exceeding rated voltage increases leakage current and may cause damage. |
| Ripple Current | Do not allow excessive ripple current. Exceeding permissible limits causes heating, reduced capacitance, and damage. Generally not more than 80% of rated current. | Ripple current causes heat; limit to prevent damage. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with rapid charge/discharge cycles to prevent damage, capacitance decrease, and heat rise. | Requires specialized capacitor design. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. | Temperature affects capacitance, leakage current, and tg. |
| Temperature & Life Relationship | Life doubles for every 10 decrease in temperature from rated temperature. Formula provided for calculation. | Life is inversely proportional to temperature. |
| Operating Frequency | Capacitance measured at 100Hz/120Hz. Capacitance decreases and tg increases with higher frequencies, causing temperature rise. | Frequency affects capacitance and dielectric loss. |
| Long-Term Storage | Capacitors stored for long periods may have increased leakage current and reduced withstand voltage. Treat with rated DC voltage before use. | Recondition before use after prolonged storage. |
| Case Insulation | Capacitor case is connected to the cathode terminal via electrolyte. Insulate at mounting point if case insulation is required. | Case is not inherently insulated. |
| Terminal/Lead Force | Do not apply excessive force to terminals or leads to prevent breakage, separation, or internal connection failure. | Handle with care to avoid mechanical stress. |
| Bending Leads | Maintain a 2mm safe spacing between bent leads and the capacitor body to prevent internal structural damage. | Proper bending technique is crucial. |
| Circuit Board Cleaning | Use recommended solvents (methanol, isopropanol, ethanol, etc.). Avoid halogenated solvents (trichloroethylene, xylene, acetone) to protect sleeve, marking, and sealing materials. | Use appropriate cleaning agents. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended: within 260 for no more than 10 seconds to avoid component damage. | Control temperature and duration during soldering. |
| Hole Layout on PCB | Hole spacing should match lead spacing. Incorrect spacing can cause stress on leads, short circuits, or damage. Consider solder splashing onto the sleeve. | Proper PCB layout is essential for reliable mounting. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECRF0809100M201P00_C156979.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
