<
>
Specifications
Lifetime:
10000hrs@105℃
Capacitance:
15uF
Height - Seated (Max):
16mm
Pin Spacing:
5mm
Voltage Rating:
250V
Diameter:
10mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECRG1016150M251P00
Package:
Through Hole,D10xL16mm
Key Attributes
Model Number:
ECRG1016150M251P00
Product Description
Product Overview
This document provides guidelines for the proper use and handling of Aluminum Electrolytic Capacitors manufactured by GuangDong TOPAZ Electronic Technology Co., Ltd. Adhering to these instructions will ensure optimal performance and extend the lifespan of the capacitors.
Product Attributes
- Brand: TOPAZCON
- Origin: China
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors for uncertain polarity. Not for AC applications. |
| Bipolar Capacitors | Suitable for pulse and polarity reverse circuits only. Not for pure AC or high ripple current circuits. |
| Voltage Application | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow excessive ripple current, which can cause heating, capacitance decrease, and damage. Generally, do not exceed 80% of rated current. |
| Charge/Discharge Circuits | Use specially designed capacitors for circuits with frequent charge/discharge cycles to prevent damage, capacitance decrease, and heat rise. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. |
| Temperature and Life Relationship | Life doubles for every 10C reduction in temperature from the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Storage | For capacitors stored long-term, apply rated DC voltage gradually before use. Storage may increase leakage current and decrease withstand voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation must be applied at the mounting point if required. |
| Force on Terminals/Leads | Avoid excessive force on terminals and leads to prevent breakage, separation, and internal connection failure. |
| Lead Bending | When bending leads for horizontal mounting, maintain a 2mm safe distance from the capacitor body to prevent internal structural damage. |
| Circuit Board Cleaning | Use recommended solvents (Methanol, isopropanol, ethanol, etc.) for cleaning after soldering. Avoid halogenated solvents (trichlorethylene, xylene, acetone) to protect the capacitor body. |
| Soldering | Maintain distance from the plastic sleeve. Recommended soldering temperature is within 260C for no more than 10 seconds to avoid component damage. |
| Hole Layout on PCB | Ensure hole spacing on the circuit board matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor body. |
2410122013_Guangdong-TOPAZ-Elec-Tech-ECRG1016150M251P00_C156750.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
