<
>
Specifications
Lifetime:
1000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
5mm
Voltage Rating:
16V
Pin Spacing:
2.5mm
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECSS0605101M016P00
Package:
Through Hole,D6.3xL5mm
Key Attributes
Model Number:
ECSS0605101M016P00
Product Description
Product Overview
This document outlines the guidelines for using Aluminum Electrolytic Capacitors to ensure optimal performance and extended lifespan. It covers critical aspects such as polarity, voltage ratings, ripple current, operating temperature, frequency, storage, and handling during soldering and cleaning.
Product Attributes
- Brand: TOPAZCON
- Origin: GuangDong, China
- Part Name: E-CAP
- Series: SS Series
Technical Specifications
| Specification | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to prevent short circuits or damage. Use bipolar capacitors when polarity is uncertain. DC electrolytic capacitors are not suitable for AC applications. Bipolar capacitors are for pulsating or polarity-reversing circuits, not pure AC or high ripple current. |
| Voltage | Do not exceed the rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow ripple current to exceed the permissible value. Excessive ripple current causes heating, capacitance reduction, and damage. Generally, ripple current should not exceed 80% of the rated value. |
| Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, leading to increased ambient temperature. |
| Temperature & Life | Capacitor characteristics vary with temperature. Lower operating temperatures ensure longer life. A 10 reduction in temperature can double the capacitor's life. Formula for life calculation provided. |
| Storage | Capacitors stored for extended periods may experience increased leakage current and reduced withstand voltage. Before use, apply rated DC voltage gradually. |
| Handling & Installation | Capacitor case is not insulated from the cathode terminal; insulation measures are required if case insulation is necessary. Avoid excessive force on terminals/leads. Maintain a 2mm safety spacing when bending leads. |
| Soldering & Cleaning | Use caution with temperature and duration during soldering (within 260, not exceeding 10 seconds). Do not use halogenated solvents for cleaning; recommended solvents include methanol, isopropanol, ethanol, etc. |
| Circuit Board Layout | Ensure hole spacing on circuit boards matches lead spacing to avoid stress on leads. Consider hole layout carefully to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECSS0605101M016P00_C156658.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
