<
>
Specifications
Mfr. Part #:
GCNR6045-100MC
Package:
SMD,6x6mm
Key Attributes
Model Number:
GCNR6045-100MC
Product Description
GCNR6045 Series Inductor
The GCNR6045 series inductor is a magnetic component designed for various electronic applications. It is manufactured by Shenzhen Glorious Electronic Co.,Ltd. and is RoHS compliant.
Product Attributes
- Brand: GLE
- Origin: China
- Certifications: RoHS Comp.
- Color: Black printing (Remarks)
Technical Specifications
| Type | Part NO. | Center Inductance Lo (uH) | Test Frequency (Hz/v) | DC Resistance (m)30% | Saturation Current Isat (A) Max. L/L-35% | Warming Current Irms (A) Max. T40 | Inductance Tolerance |
|---|---|---|---|---|---|---|---|
| GCNR6045 | GCNR6045-2R2M | 2.2 | 100KHz/1v | 21 | 6.00 | 4.00 | M = 20% |
| GCNR6045 | GCNR6045-3R3M | 3.3 | 100KHz/1v | 23 | 5.20 | 3.00 | M = 20% |
| GCNR6045 | GCNR6045-4R7M | 4.7 | 100KHz/1v | 25 | 4.00 | 3.00 | M = 20% |
| GCNR6045 | GCNR6045-6R8M | 6.8 | 100KHz/1v | 40 | 3.80 | 3.00 | M = 20% |
| GCNR6045 | GCNR6045-100M | 10 | 100KHz/1v | 47 | 3.00 | 2.50 | M = 20% |
| GCNR6045 | GCNR6045-150M | 15 | 100KHz/1v | 77 | 2.30 | 2.00 | M = 20% |
| GCNR6045 | GCNR6045-220M | 22 | 100KHz/1v | 115 | 1.90 | 1.80 | M = 20% |
| GCNR6045 | GCNR6045-330M | 33 | 100KHz/1v | 145 | 1.50 | 1.45 | M = 20% |
| GCNR6045 | GCNR6045-470M | 47 | 100KHz/1v | 220 | 1.30 | 1.25 | M = 20% |
| GCNR6045 | GCNR6045-680M | 68 | 100KHz/1v | 330 | 1.00 | 0.90 | M = 20% |
| GCNR6045 | GCNR6045-101M | 100 | 100KHz/1v | 500 | 0.80 | 0.70 | M = 20% |
General Specifications
| Item | Specification | Condition |
|---|---|---|
| Terminal Strength | No electrode detachment should be found | When the device is pushed in two directions of X and Z with the force of 5N for 102seconds after soldering between copper plate and the electrodes |
| Reflow test | Change from an initial value L : within20% | Peak temp 2405 3010s. The specimen shall be subjected to the reflow process under the above condition 2 times. Test board shall be 0.8mm thick. Base material shall be glass epoxy resin. Measurement: The specimen shall be stored at standard atmospheric conditions for 1 h in prior to the measurement. |
| Vibration | Change from an initial value L : within20% | The specimen shall be subjected to a vibration of 1.5mm amplitude, sweep frequency 10~55~10Hz after vibration for 1 hours |
| Free fall test | Change from an initial value L : within20% | The specimen must be fixed on test board. Then it shall be fallen freely from 1m height. 10 consecutive times. |
| High temperature and high humidity test | Change from an initial value L : within20% | The specimen shall be stored at a temperature of 402 with relative humidity of 90 ~ 95% for 96 4h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| High temperature preservation test | Change from an initial value L : within20% | The specimen shall be stored at a temperature of 1252 for 96 1h. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Low temperature preservation test | Change from an initial value L : within20% | After stored at a temperature of -40 3 for 96 1h. The specimen should be measured, then it should be measured under normal temperature and humidity in 1h~ 2h hours. |
| Solder ability test | 95 . | Terminals shall be immersed in flux at room temperature. Dip sample into solder bath containing molten solder at 2605 for 30.5 seconds. |
| Cold and hot cycle test | Change from an initial value L : within20% | The specimen shall be measured after 20 continuous cycles of temperature change of -403 for 30 min and 1252 for 30 min with the transit period of 2min or less. Then it shall be stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Storage temperature and humidity range | temperature range 535 humidity range 25%80% | In packing state. |
| Standard atmospheric conditions | Ambient temperature : 5to 35, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa. If more strict measurement is required, measurement shall be made within following limits; Ambient temperature : 202, Relative humidity: 655%, Air pressure: 86kPa to 106kPa | Unless otherwise specified |
Reflow Soldering Condition
- Reflow times: 2 times max
- Recommended heat source: infrared ray. Halogen lamp is not recommended due to side heat differences.
Recommended PCB Pattern
(Dimensions in mm - image not provided in source text)
Packing Specifications
Tape Dimensions: A: 16.0, B: 7.50, C: 1.75, D: 12.0, E: 4.00, F: 2.00, G: 1.50, H: 0.40
Reel Dimensions: A: 330.0, B: 13.0, C: 21.0, D: 20.4, E: 100, F: 16.4
Taping method: Cold seal (Direction seen from top cover tape side)
Packing box: Kraft paper, 3 reels/box
Quantity per reel: 1000 PCS / reel
Marking: Customer's part number, Quantity, Lot number.
Prohibited Substances
RoHS Regulated Substances:
- Lead and its compounds
- Mercury and its inorganic compounds
- Cadmium and its compounds
- Hexavalent chromium compounds
- PBB (Polybrominated Biphenyls)
- PBDE (Polybrominated Diphenyl Ethers)
Prohibition to use Ozone Depleting Substances (ODS):
- CFCs (Chlorofluorocarbons)
- Halon
- Carbon tetrachloride
- Trichloroethane (Methyl chloroform)
Shenzhen Glorious Electronic Co.,Ltd. confirms that its products and production processes comply with RoHS and HF regulations, and all materials used are registered under the Regulation of Manufacture of Chemical Substances.
2410121507_GLE-GCNR6045-100MC_C439378.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
