Shenzhen Glorious Electronic Co.Ltd. GCNR8040 Series Inductors
The GCNR8040 series inductors from Shenzhen Glorious Electronic Co.Ltd. are designed for various electronic applications. These components are manufactured using high-quality magnetic powder, polyurethane-coated copper wire, and nickel zinc ferrite magnetic powder with epoxy resin, with tin electrodes. They are RoHS compliant.
Product Attributes
- Brand: Shenzhen Glorious Electronic Co.Ltd.
- Part Series: GCNR8040
- Origin: China (Materials)
- Certifications: RoHS Comp.
- Color: Black printing
Technical Specifications
| Part NO. | Type | Inductance Lo (uH) | Test Frequency (Hz/v) | DC Resistance (m)30% | Saturation Current Isat (A) Max. L/L-35% | Temperature Rise Current Irms (A) Max. T40 | Inductance Tolerance |
| GCNR8040-2R2MC | GLE | 2.2 | 100KHz/1v | 12 | 7.10 | 5.15 | 10% (K) |
| GCNR8040-3R3MC | GLE | 3.3 | 100KHz/1v | 17 | 6.50 | 4.40 | 10% (K) |
| GCNR8040-4R7MC | GLE | 4.7 | 100KHz/1v | 20 | 5.90 | 4.10 | 10% (K) |
| GCNR8040-5R6MC | GLE | 5.6 | 100KHz/1v | 24 | 5.50 | 3.85 | 10% (K) |
| GCNR8040-6R8MC | GLE | 6.8 | 100KHz/1v | 28 | 4.55 | 3.60 | 10% (K) |
| GCNR8040-100MC | GLE | 10 | 100KHz/1v | 34 | 3.80 | 3.30 | 10% (K) |
| GCNR8040-150MC | GLE | 15 | 100KHz/1v | 56 | 2.95 | 2.60 | 10% (K) |
| GCNR8040-220MC | GLE | 22 | 100KHz/1v | 74 | 2.40 | 2.10 | 10% (K) |
| GCNR8040-330MC | GLE | 33 | 100KHz/1v | 100 | 2.05 | 1.80 | 10% (K) |
| GCNR8040-470MC | GLE | 47 | 100KHz/1v | 158 | 1.75 | 1.55 | 10% (K) |
| GCNR8040-680MC | GLE | 68 | 100KHz/1v | 196 | 1.45 | 1.25 | 10% (K) |
| GCNR8040-101MC | GLE | 100 | 100KHz/1v | 295 | 1.15 | 1.00 | 10% (K) |
| GCNR8040-151MC | GLE | 150 | 100KHz/1v | 470 | 1.10 | 0.85 | 10% (K) |
| GCNR8040-221MC | GLE | 220 | 100KHz/1v | 660 | 0.85 | 0.80 | 10% (K) |
| GCNR8040-331MC | GLE | 330 | 100KHz/1v | 970 | 0.68 | 0.64 | 10% (K) |
| GCNR8040-471MC | GLE | 470 | 100KHz/1v | 1400 | 0.60 | 0.50 | 10% (K) |
General Specifications
Environmental and Reliability Tests
| Item | Specification | Condition | Change from initial value |
| Terminal Strength | No electrode detachment | 5.0N static load in X.Z direction for 102 seconds after soldering to copper plate. | N/A |
| Reflow test | L : within20% | Peak temp 2405, 3010s. Subjected to reflow process 2 times on a 0.8mm thick glass epoxy resin test board. Stored at standard atmospheric conditions for 1h before measurement. | L : within20% |
| Vibration | L : within20% | Vibration frequency 105510Hz, amplitude 1.5mm, for 1 hour. | L : within20% |
| Free fall test | L : within20% | Specimen fixed on test board, free fall from 1m height, 10 consecutive times. | L : within20% |
| High temperature and high humidity test | L : within20% | 402, 9095% RH for 964h. Stabilized under standard atmospheric conditions for 1h before measurement (within 1h~2h). | L : within20% |
| High temperature preservation test | L : within20% | 1252 for 961h. Stabilized under standard atmospheric conditions for 1h before measurement (within 1h~2h). | L : within20% |
| Low temperature preservation test | L : within20% | -403 for 961h. Stabilized under standard atmospheric conditions for 1h before measurement (within 1h~2h). | L : within20% |
| Solder ability test | New solder shall cover 95% minimum of the surface immersed. | Terminals immersed in flux, then dipped in solder bath at 2605 for 30.5 seconds. | N/A |
| Cold and hot cycle test | L : within20% | 20 cycles of -403 (30 min) and 1252 (30 min), transit time 2min. Stabilized under standard atmospheric conditions for 1h before measurement (within 1h~2h). | L : within20% |
| Storage temperature and humidity range | Temperature: 535, Humidity: 25%80% | In packing state. | N/A |
Standard Atmospheric Conditions
Unless otherwise specified: Ambient temperature: 5 to 35, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa. For stricter measurements: Ambient temperature: 202, Relative humidity: 655%, Air pressure: 86kPa to 106kPa.
Reflow soldering condition
Number of times: 2 times max. Recommended heat source: infrared ray. Halogen lamp is not recommended due to side heat.
Recommended PCB pattern
(Dimensions in mm - diagram omitted as per instructions)
Prohibited Substances
RoHS regulated substances: Lead and its compounds, Mercury and its inorganic compounds, Cadmium and its compounds, Hexavalent chromium compounds, PBB, PBDE. Ozone depleting substances: CFCs, Halon, Carbon tetrachloride, Trichloroethane (Methyl chloroform). The company confirms its products and production process comply with RoHS regulations and all materials used are registered.
2410121507_GLE-GCNR8040-100MC_C439388.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
