<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
11mm
Pin Spacing:
2.5mm
Voltage Rating:
35V
Diameter:
6.3mm
Tolerance:
±20%
Mfr. Part #:
ECLF0611101M035P00
Package:
Through Hole,D6.3xL11mm
Key Attributes
Model Number:
ECLF0611101M035P00
Product Description
Product Overview
This document outlines the guidelines for using Aluminum Electrolytic Capacitors to ensure optimal performance and extended lifespan. It details critical usage considerations such as polarity, voltage limits, ripple current, operating temperature, and storage. Proper handling and adherence to these guidelines are essential for reliable capacitor operation.
Product Attributes
- Brand: TOPAZCON (GuangDong TOPAZ Electronic Technology Co., Ltd.)
- Origin: China
- Product Type: Aluminum Electrolytic Capacitors
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Bipolar capacitors are for pulse and polarity reverse circuits, not pure AC or high ripple. |
| Voltage | Do not apply voltage greater than rated voltage. Recommended working voltage is 70-80% of rated voltage. |
| Ripple Current | Do not allow excessive ripple current. Generally, not more than 80% of rated current. Exceeding limits causes heating, capacitance reduction, and damage. |
| Frequency | Capacitance measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequency, leading to temperature rise. |
| Temperature | Characteristics vary with temperature. Lower temperatures ensure longer life. Life doubles for every 10 decrease in temperature. |
| Storage | For capacitors stored long-term, apply rated DC voltage gradually before use. Storage may increase leakage current and decrease withstand voltage. |
| Case Insulation | Capacitor case is not insulated from the cathode terminal. Insulation must be applied at the mounting point if required. |
| Handling | Do not apply excessive force to terminals or leads to prevent breakage or internal connection failure. |
| Bending Leads | When bending leads for horizontal mounting, maintain a 2mm safe distance from the capacitor body to avoid structural damage. |
| Cleaning | Do not use halogenated solvents (e.g., trichlorethylene, xylene, acetone) for cleaning circuit boards. Recommended solvents: methanol, isopropanol, ethanol, isobutanol, petroleum ether, propanol, and commercial detergents. |
| Soldering | Keep soldering irons away from plastic sleeves. Recommended solder bath temperature: within 260 for no more than 10 seconds. |
| PCB Layout | Ensure mounting hole spacing matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECLF0611101M035P00_C156554.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
