<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
10uF
Height - Seated (Max):
7mm
Pin Spacing:
2mm
Voltage Rating:
50V
Diameter:
5mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ECSS0507100M050P00
Package:
Through Hole,D5xL7mm
Key Attributes
Model Number:
ECSS0507100M050P00
Product Description
Product Overview
This document outlines the guidelines for using Aluminum Electrolytic Capacitors from GuangDong TOPAZ Electronic Technology Co., Ltd. to ensure optimal performance and extended lifespan. It covers essential considerations such as polarity, voltage ratings, ripple current, operating temperature, and proper handling during installation and maintenance.
Product Attributes
- Brand: TOPAZCON
- Origin: GuangDong, China
- Product Type: Aluminum Electrolytic Capacitor
- Series: SS Series
Technical Specifications
| Item | Description |
| Polarity | DC electrolytic capacitors are polarized. Ensure correct polarity to avoid short circuits or damage. Use bipolar capacitors for uncertain polarity. Not suitable for AC applications. |
| Bipolar Capacitors | Suitable for pulse circuits and polarity reverse circuits. Not applicable for pure AC or high ripple current circuits. |
| Voltage Rating | Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life. |
| Ripple Current | Do not allow ripple current to exceed permissible limits (generally not more than 80% of rated value) to prevent overheating and damage. |
| Fast Charge/Discharge Circuits | Use specially designed capacitors for circuits with frequent charge/discharge cycles to prevent damage and premature failure. |
| Operating Temperature | Capacitor characteristics vary with temperature. Lower temperatures generally ensure longer life. |
| Temperature and Life Relationship | Life is approximately doubled for every 10 reduction in operating temperature below the rated temperature. Formula provided for calculation. |
| Operating Frequency | Capacitance is typically measured at 100Hz or 120Hz. Capacitance decreases and tg increases with higher frequencies, potentially increasing ambient temperature. |
| Storage and Usage | For capacitors stored long-term, apply rated DC voltage gradually before use to restore performance and withstand voltage. |
| Case Insulation | The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if case insulation is necessary. |
| Force on Terminals/Leads | Avoid applying excessive force to terminals and leads to prevent breakage, separation, or internal connection failure. |
| Lead Bending | When bending leads for horizontal mounting, maintain a 2mm safe spacing from the capacitor body to prevent internal structural damage. |
| Circuit Board Cleaning | Use recommended solvents (Methanol, Isopropanol, Ethanol, etc.) for cleaning. Avoid halogenated agents or solvents like trichlorethylene, xylene, or acetone to protect the capacitor body. |
| Soldering | Maintain distance between soldering iron and plastic sleeve. Recommended solder bath temperature is within 260 for no more than 10 seconds to prevent component damage. |
| Hole Layout on PCB | Ensure hole spacing on the circuit board matches lead spacing to avoid stress on leads. Consider hole layout to prevent solder splashing onto the capacitor body. |
2304140030_Guangdong-TOPAZ-Elec-Tech-ECSS0507100M050P00_C156629.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
