<
>
Specifications
Current - Saturation (Isat):
2.1A
Mfr. Part #:
GCNR5020-6R8MC
Package:
2020
Key Attributes
Model Number:
GCNR5020-6R8MC
Product Description
Product Overview
The GCNR5020 GLE is a magnetic component designed for various electronic applications. It is manufactured by Shenzhen Glorious Electronic Co.,Ltd. and adheres to RoHS compliance.
Product Attributes
- Brand: GLE
- Origin: China
- Material: Nickel zinc ferrite magnetic powder, Polyurethane-system coated copper wire, Magnetic epoxy resin, Tin
- Certifications: RoHS Comp.
Technical Specifications
| Part NO. | Inductance Lo (uH) | Test Frequency (Hz/v) | DC Resistance (m)30% | Saturation Current Isat (A) Max. L/L-35% | Temperature Rise Current Irms (A) Max. T40 | Inductance Tolerance |
| GCNR5020-1R0MC | 1.0 | 100KHz/1v | 20 | 4.33 | 4.30 | M=20% |
| GCNR5020-1R5MC | 1.5 | 100KHz/1v | 26 | 4.10 | 3.20 | M=20% |
| GCNR5020-2R2MC | 2.2 | 100KHz/1v | 38 | 3.20 | 2.90 | M=20% |
| GCNR5020-3R3MC | 3.3 | 100KHz/1v | 46 | 2.55 | 2.50 | M=20% |
| GCNR5020-4R7MC | 4.7 | 100KHz/1v | 65 | 2.40 | 2.20 | M=20% |
| GCNR5020-6R8MC | 6.8 | 100KHz/1v | 92 | 2.10 | 1.80 | M=20% |
| GCNR5020-8R2MC | 8.2 | 100KHz/1v | 100 | 1.90 | 1.68 | M=20% |
| GCNR5020-100MC | 10 | 100KHz/1v | 125 | 1.50 | 1.45 | M=20% |
| GCNR5020-150MC | 15 | 100KHz/1v | 180 | 1.44 | 1.25 | M=20% |
| GCNR5020-220MC | 22 | 100KHz/1v | 250 | 1.18 | 1.10 | M=20% |
| GCNR5020-330MC | 33 | 100KHz/1v | 370 | 0.97 | 0.93 | M=20% |
| GCNR5020-470MC | 47 | 100KHz/1v | 560 | 0.81 | 0.77 | M=20% |
General Specifications
| Item | Specification | Condition |
| Terminal Strength | No electrode detachment should be found | The device is pushed in two directions of X and Z with the force of 5N for 102 seconds after soldering between copper plate and the electrodes. |
| Reflow test | Change from an initial value L : within20% | Peak temp 2405, 3010s. The specimen shall be subjected to the reflow process under the above condition 2 times. Test board shall be 0.8mm thick. Base material shall be glass epoxy resin. Measurement shall be made after storing at standard atmospheric conditions for 1 h. |
| Vibration | Change from an initial value L : within20% | A vibration of 1.5mm amplitude, sweep frequency 10~55~10Hz for 1 hour. |
| Free fall test | Change from an initial value L : within20% | The specimen must be fixed on test board. Then it shall be fallen freely from 1m height, 10 consecutive times. |
| High temperature and high humidity test | Change from an initial value L : within20% | Stored at a temperature of 402 with relative humidity of 90 ~ 95% for 96 4h. Stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| High temperature preservation test | Change from an initial value L : within20% | Stored at a temperature of 1252 for 96 1h. Stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Low temperature preservation test | Change from an initial value L : within20% | Stored at a temperature of -40 3 for 96 1h. Measured under normal temperature and humidity in 1h~ 2h hours. |
| Solder ability test | New solder shall cover 95% minimum of the surface immersed. | Terminals shall be immersed in flux at room temperature. Dip sample into solder bath containing molten solder at 2605 for 30.5 seconds. |
| Cold and hot cycle test | Change from an initial value L : within20% | 20 continuous cycles of temperature change of -403 for 30 min and 1252 for 30 min with the transit period of 2min or less. Stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h. |
| Storage temperature and humidity range | temperature range 535 humidity range 25%80% | In packing state. |
Prohibited Substances
The product complies with RoHS and HF regulations, restricting the use of Lead, Mercury, Cadmium, Hexavalent chromium compounds, PBB, and PBDE. Additionally, the use of Ozone Depleting Substances (ODS) such as CFCs, Halon, Carbon tetrachloride, and Trichloroethane is prohibited.
2410121507_GLE-GCNR5020-6R8MC_C439366.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
