<
>
Specifications
Current - Saturation (Isat):
350mA
Mfr. Part #:
GCNR3015E-470M01
Package:
SMD,3x3mm
Key Attributes
Model Number:
GCNR3015E-470M01
Product Description
Product Overview
The GCNR3015E series is a magnetic component designed for electronic applications. It features a compact physical dimension of 3.0x3.0x1.5mm and is constructed with high-quality materials including nickel-zinc ferrite magnetic powder and polyurethane-coated copper wire. This product is RoHS compliant, ensuring it meets environmental regulations.
Product Attributes
- Brand: Shenzhen Glorious Electronic Co.,Ltd.
- Origin: China (Magnetic powder, Magnetic epoxy resin, Electrode), Germany (Wire)
- Material: Nickel zinc ferrite magnetic powder, Polyurethane-system coated copper wire, Magnetic epoxy resin, Tin
- Color: Black printing
- Certifications: RoHS Comp.
Technical Specifications
| Item | Specification | Condition | Measurement | |||
| Physical Dimensions (mm) | A: 3.00.2, B: 3.00.2, C: 1.50.1, D: 2.50.2, E: 0.750.2, F: 1.50.2 | |||||
| Materials | Magnetic powder: Nickel zinc ferrite magnetic powder (China) Wire: Polyurethane-system coated copper wire (Germany) Magnetic epoxy resin: Nickel zinc ferrite magnetic powder + epoxy (China) Electrode: Tin (China) | |||||
| Bending test | Change from an initial value L : within10% | Apply pressure gradually until bent depth reaches 3mm and hold for 305s. | ||||
| Adhesion strength | Change from an initial value L : within10% | Apply a static load using a R0.5 pressing tool in the direction of the arrow and hold for 605s. Measure after removing pressure. | ||||
| Vibration | Change from an initial value L : within10% | Sweep frequency 10~55Hz, amplitude 1.5mm, for 2 h in each of 3(X,Y,Z) axes. | ||||
| Mechanical shock | Change from an initial value L : within10% | Peak acceleration: 981 m/S2, Duration of pulse: 6ms, 3 times in each of 3(X,Y,Z)axes. Specimen must be fixed on test board. | ||||
| Free fall test | Change from an initial value L : within10% | Specimen fixed on test board, equipped with 500g instruments, fallen freely from 1m height, 3 times in each of three axes. | ||||
| Solder ability | 90% minimum of the surface immersed shall be covered. | Terminals immersed in flux for 5 to 10 seconds. Dip sample into solder bath at 2455 for 30.5 seconds. | ||||
| Resistance to soldering heat | Change from an initial value L : within10% | Reflow soldering method: Preheat 150~180 (9030s), Peak temp 260 (230min, 3010s). Test board thickness 0.8mm. Performed 2 times. | Stored at standard atmospheric conditions for 1 h prior to measurement. | |||
| Dielectric strength | Without damage. | 100V DC applied for 60s between the terminal and the core. | ||||
| Insulation resistance | 100M or more. | 100V DC applied between the terminal and the core. | ||||
| Low temperature | Change from an initial value L : within10% | Stored at -403 for 50012h. Stabilized under standard atmospheric conditions for 1h~2h. | ||||
| Dry heat | Change from an initial value L : within10% | Stored at 852 for 50012h. Stabilized under standard atmospheric conditions for 1h before measurement. | ||||
| Damp heat | Change from an initial value L : within10% | Stored at 602, 90~95% RH for 50012h. Stabilized under standard atmospheric conditions for 1h before measurement. | ||||
| Temperature cycle | Change from an initial value L : within10% | 500 continuous cycles of -40 (30 min) and 85 (30 min) with transit period of 2min or less. Stabilized under standard atmospheric conditions for 1h before measurement. | ||||
| Temperature drift | Inductance temperature coefficient 2000 ppm/ or less | Measured in the range of -25 to 85. | ||||
| Operating temperature range | -40 ~ +125 | Includes product heating temperature. | ||||
| Storage temperature range | -40 ~ +85 (* -40 ~ +60) | In packing state. | ||||
| Standard atmospheric conditions | Ambient temperature: 5 to 35, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa. Stricter: Ambient temperature: 202, Relative humidity: 655%, Air pressure: 86kPa to 106kPa. | |||||
| Reflow soldering condition | 2 times max | Recommended heat source: Infrared ray. Halogen lamp not recommended due to side heat. | ||||
| Recommended PCB pattern | (Dimensions provided in mm) | |||||
| Part Specifications | Model | Center Inductance Lo (uH) | Test Frequency (Hz/v) | DC Resistance (m)30% | Saturation Current Isat (A) Max. L/L30% | Temperature Rise Current Irms (A) Max. T40 |
| GCNR3015E-1R0M01 | 1.0 | 100KHz/1v | 37 | 2.10 | 1.90 | |
| GCNR3015E-1R5M01 | 1.5 | 100KHz/1v | 50 | 1.80 | 1.70 | |
| GCNR3015E-2R2M01 | 2.2 | 100KHz/1v | 60 | 1.60 | 1.45 | |
| GCNR3015E-3R3M01 | 3.3 | 100KHz/1v | 80 | 1.32 | 1.20 | |
| GCNR3015E-4R7M01 | 4.7 | 100KHz/1v | 125 | 1.10 | 1.08 | |
| GCNR3015E-5R6M01 | 5.6 | 100KHz/1v | 182 | 1.00 | 0.95 | |
| GCNR3015E-6R8M01 | 6.8 | 100KHz/1v | 200 | 0.87 | 0.85 | |
| GCNR3015E-100M01 | 10 | 100KHz/1v | 250 | 0.72 | 0.70 | |
| GCNR3015E-150M01 | 15 | 100KHz/1v | 350 | 0.65 | 0.64 | |
| GCNR3015E-220M01 | 22 | 100KHz/1v | 460 | 0.52 | 0.57 | |
| GCNR3015E-330M01 | 33 | 100KHz/1v | 780 | 0.38 | 0.35 | |
| GCNR3015E-470M01 | 47 | 100KHz/1v | 1200 | 0.35 | 0.30 | |
| Inductance Tolerance | J =5%, K =10%, L =15%, M = 20%, N=30% | (Characteristics are subject to actual product) | ||||
| Packing Specifications | Tape Dimensions (mm) | Taping method | Reel dimensions (mm) | Packing box | Marking | |
| A: 8.00, B: 3.50, C: 1.75, D: 4.00, E: 4.00, F: 2.00, G: 1.50, H: 0.30 | Heat seal (view from top cover tape side) | A: 178, B: 13.0, C: 21.0, D: 10.8, E: 60.0, F: 9.0 | Material: Kraft paper Quantity per box: 5 reels / 1 box | Customer's part number, Quantity, Lot number. | ||
| Quantity per reel | 2000PCS / reel | |||||
| Prohibited Substances | RoHS regulated substances: Lead and its compounds, Mercury and its inorganic compounds, Cadmium and its compounds, Hexavalent chromium compounds, PBB, PBDE. Ozone depleting substances: CFCs, Halon, Carbon tetrachloride, Trichloroethane (Methyl chloroform). | Company confirms products and production process accord with "rule of RoHS". All materials used are registered material under Regulation of Manufacture of Chemical Substances. |
2411041822_GLE-GCNR3015E-470M01_C439332.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
